audizio HTS20 Speaker Wall Bracket Instruction Manual
- June 4, 2024
- audizio
Table of Contents
HTS20 Speaker Wall Bracket
Instruction Manual
HTS20 Speaker Wall Bracket
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
please contact your local distributor for assistance.
CAUTION!
- Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT! Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
contact your place of purchase for a replacement.
MAINTENANCE Check that the product is secure and safe to use at regular
intervals (at least every three months).
CHECK
STEP 1
STEP 2
Attach the dual hole plate to the speaker
OR
Attach the single hole plate to the speaker
STEP 3
Install the speaker mount on a wooden stud
OR
Install the speaker mounted on a brick or concrete wall
STEP 4
Attach the speaker mount to the double hole plate on the speaker
OR
Attach the speaker mount to the single hole plate on the speaker
STEP 5
Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2021 by Tronios The Netherlands