REXING X5 Wireless Car Holder/Charger User Guide
- June 6, 2024
- Rexing
Table of Contents
REXING X5 Wireless Car Holder/Charger
Package
- Wireless charger
- Type-C cable
- Adjustable suction cup mount
- Air vent mount
- User manual
Functional component
Specifications
Direction for use
- Assemble the product and any accessory through a ball head nut and tighten it (compatible with other ball head diameter 17mm accessories), and fix it in an ideal position. Connect the product to the QC3.0 car charger (optional) with the data cable, and insert to the cigarette lighter to get electricity.
- After the product is powered on, the ring indicator light will turn on blue breathingly, and the left and right telescopic arms will automatically open after 5 seconds to wait for the mobile phone to be placed; if the product does not turn on red after power on (not turn on, flash or turn on other color lights) All indicate that there is a problem with the product, please stop using it and return it to the seller for processing).
- In order to ensure the efficiency and stability of charging, before putting the phone on, adjust the bottom bracket position of the stand and try to align the center position of the back of the phone with the ” Rexing ” symbol on the stand panel as much as possible. Cell phones of different sizes should correspond to different Stalls. The best distance for wireless charging is within 6mm and cannot penetrate metal, so it is necessary to avoid using metal or too thick (greater than 3mm) mobile phone protective shells to ensure fast wireless charging of mobile phones.
- After placing the phone, the left and right clamping arms will automatically clamp the phone. If the phone supports QI wireless charging protocol, the product will start wireless charging at the same time, and the indicator light turns green breathingly when the product wireless charging starts; if the phone does not support wireless charging, the indicator light green and blue flash alternately for 5 seconds and then the light goes out. The maximum charging power of this product is 15W, and the charging efficiency will vary according to the charging environment and mobile phone.
- When the product is powered on, you can open the clamp arms by pressing any button on both sides of the product to remove the phone; after removing the phone, the indicator will immediately show a blue light standby state. (The buttons on both sides of the product can be clamped or opened with any one key.)
- When the product is turned off and the product stops supplying power, if the mobile phone is still on the holder, the holder will issue an alarm 5 times within 2 seconds to remind the user to remove the mobile phone. (The built-in supercapacitor is powered off for 5 minutes.You can press the side button to open the arm to take away the phone. )
Suction cup holder
Place the suction cup on a suitable flat position, adjust the angle and press the button to lock the suction cup firmly onto the flat surface. After fixing, the angle and the front-to-back distance can be adjusted at will. TPU suction cup + glue double adsorption, one key to lock.
**Air vent mount
**
Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches.
Overview
Thank you for choosing RACING! We hope you love your new product as much as we do. If you need assistance or have any suggestions to improve it, please contact us. You can reach us via care@rexingusa.com or call us at 203-800-4466. Our support team will respond to you as soon as possible. Always a surprise in Rexing. Check us out here.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>