iSMART CW305 Multifunction 3in1 Wireless Charging Dock for iPhone Instruction Manual
- June 6, 2024
- ISMART
Table of Contents
CW305
user Instruction Manual
Product description
Use steps:
1.1 Plug the watch’s wireless charging head into the bracket slot.
1.2 Again thread the USB plug of the cable into the main hole position of the
product, then place the bracket into the main hole position.
1.3Plug the Apple Watch charging cable Into the USB power port, and then plug
the cable from 2m long, wiring (can not be completely hidden, part of it
extends) from end A to end B into the cable slot.
1.4 The hidden wiring of the watch charger USB cable is as follows: 1m long,
wiring (completely hidden)
2m long, wiring (can not be completely hidden, part of it extends)
0.3m long, wiring
2 Connect to the power supply.
2.1 Prepare a power adapter that connect to CW305 wireless charging via Type-C
power cable.
2.2 The red power indicator light at the bottom after power on indicates that
the power is on normally.
3 Product charging work introduction.
3.1When the mobile phone is erected or placed horizontally in the 10W wireless charging panel area, align the wireless charging central point of the mobile phone with the central point of the charging area, the blue working indicator light is always on indicating that it is charging normally. Note: when the mobile phone is placed vertically, the baffle above the panel should be folded away, and the baffle above the bracket should be opened when the phone is placed horizontally. Do not paste metal on the back of the mobile phone. Please remove the protective cover when charging, so as not to affect the charging efficiency.
3.2 When the headphone is placed in a 5W wireless charging area, align the
wireless charging central point of the headphone with the central point of the
charging area, the blue working indicator light is always on indicating that
it is charging normally.
3.3 Place the watch in the bracket wireless charging area by magnetic suction.
When the watch screen shows a charging icon, it indicates that it is charging
normally.
4 Indicator light introduction.
4.1 The red power indicator light at the bottom indicates normal power supply
after power on, and the blue working indicator light in front of the product
flashes 3 times and then extinguishes. 4.2 The blue working indicator light is
not on when not charged and fully charged.
4.3 The blue working indicator light is always on during charging.
4.4 The blue indicator light flashes when charging is abnormal.
Product specifications:
| Name | Wireless Charger | Model | CW305 |
|---|---|---|---|
| Product size | 170mm x 130mm x 19mm | Power supply interface | Type-C |
| Input | 5V 2A or 9V 2A(Above) | Output | 3W/5W/10W |
| Transmission distance | 5 5mm | Product standards | Compliance with QI standards |
FCC WARNING STATEMENT
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the – equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 15 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.