VIKING SA-TBA Tile Bridge for Ceiling Speakers User Manual

DESIGNED, MANUFACTURED, AND SUPPORTED IN THE USA
PRODUCT MANUAL
SA-TBA Tile Bridge
September 23, 2020

Tile Bridge for Ceiling Speakers

SA-TBA Tile Bridge for Ceiling Speakers

The SA-TBA tile bridge is designed to mount an 8-inch ceiling speaker and can be used to bridge a 2 ft x 2 ft or 2 ft x 4 ft ceiling tile. The tile bridge is compatible with Viking speaker models SA-1S, 30AE, 35AE, 40AE, 40-IP and 40TB-IP. The SA-TBA tile bridge is constructed of 24 gauge cold rolled steel with an electro-galvanized rust-resistant finish.

Features

• Fits a standard 8-inch ceiling speaker
• Bridges 2 ft x 2 ft or 2 ft x 4 ft ceiling tiles
• Clearance holes for easy installation
• 24 gauge galvanized steel

www.vikingelectronics.com
Information: 715-386-8861

Applications

• When light duty ceiling tiles need help supporting a ceiling speaker

Specifications

Dimensions: 14.5” x 23.75” (368 mm x 603 mm)
Shipping Weight: 1.1 lbs (0.5 kg) Material: 24 gauge CRS
Finish: Rust-resistant electro galvanized finish Mounting
Hole: 9.69” diameter

Installation

Model SA-TBA Tile Bridge *

2 x 2 ft or 2 x 4 ft Ceiling Tile with 8″ Speaker (not included)

* CAUTION: Sharp Edges!

Compatible Products

Cost-Effective Ceiling Speakers for Indoor Use

The 25AE, 30AE, 35AE, and 40AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, PA-15, PA-30, PA-60, HF-3W, M2W) or to any system with an 8 ohm output.
In outdoor, factory or warehouse environments, 25AE or 300AE paging horns are the best method of producing understandable sound. In these environments the directional design allows the installer to focus the sound cone down aisles and toward work areas. In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE, 35AE, 40AE, 40-IP and 40TB-IP speakers in close proximity offer the best distribution and are cost effective. The 35AE speakers include a volume control. 40-IP and 40TB-IP are used in SIP and Multicast applications.

25AE Paging Horn Features

• Adjustable base for easy mounting and directional adjustment
• Compact design for discreet mounting

30AE/35AE Ceiling Speaker Features

• Metal white grill for flush mounting in office ceilings
• Mounting hardware included
• Excellent frequency response
• Model 35AE includes a volume control

40AE Ceiling Speaker Features

• Attractive with a modern look
• Flush mount in 9.5” to 10” diameter hole
• Integral mounting system
• Excellent sound quality

40-IP Ceiling Speaker Features

• Use in SIP and Multicast applications
• Attractive with a modern look
• Flush mount in 9.5” to 10” diameter hole
• Integral mounting system
• Excellent sound quality

40TB-IP Ceiling Speaker Features

• Talk back speaker used in SIP and multicast applications
• Attractive with a modern look
• Flush mount in 9.5” to 10” diameter hole
• Integral mounting system
• Excellent sound quality

Warranty

IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT VIKING TECHNICAL SUPPORT AT: 715-386-8666
Our Technical Support Department is available for assistance Monday to Friday 8:00am – 5:00pm central time. Before you call, please:

1. Know the model number, the serial number, and what software version you have (see serial label).
2. Have the Product Manual in front of you.
3. It is best if you are on site.

RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:

1. Customer must contact Viking’s Technical Support Department at 715-3868666 to obtain a Return Authorization (RA) number. The customer MUST have a complete description of the problem, with all pertinent information regarding the defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.

2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. The original product boxes are not designed for shipping – an overpack box is required to prevent damage in transit. Static-sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
   VIKING ELECTRONICS 1531 INDUSTRIAL STREET HUDSON, WI 54016

3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.

4. RA number on carton: In large printing, write the RA number on the outside of each carton being returned.

RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):

1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The customer MUST be able to step through recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer’s input and troubleshooting, a Return Authorization (RA) number will be issued. This number is valid for fourteen (14) calendar days from the date of issue.
3. After obtaining the RA number, return the approved equipment to your distributor. Please reference the RA number on the paperwork being shipped back with the unit(s), and also the outside of the shipping box. The original product boxes are not designed for shipping – an overpack box is required to prevent damage in transit. Once your distributor receives the package, they will replace the product over the counter at no charge. The distributor will then return the product to Viking using the same RA number.
4. The distributor will NOT exchange this product without first obtaining the RA number from you. If you haven’t followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.

TWO-YEAR LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking’s Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. This warranty does not cover any damage to the product due to lightning, over-voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments. This warranty does not cover stainless steel surfaces that have not been properly maintained.
NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD HEREUNDER.
EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING’S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.
IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED AS SUCH.

Product Support:715-386-8666 
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

DOD 534
Printed in the U.S.A.
ZF303470 REV B

References

• Security & Communication Systems - Access Control | Viking Electronics, Inc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>