Touche Controls SCC-D010 Smart Channel Control 0-10V Dimmer Instruction Manual
- June 17, 2024
- Touche Controls
Table of Contents
Touche Controls SCC-D010 Smart Channel Control 0-10V Dimmer
Specifications
- Product: Smart Channel Control 0-10V Dimmer
- Model Number: SCC-D010
- Input Voltage: 0-10V
- Control Interface : RJ45 SmartNet Ports
- Maximum SmartNet Length : 400 feet
Product Usage Instructions
Installation
- Locate a standard 4 square electrical box for installation.
- Connect the 0-10V input line voltage from the primary controller to the lighting fixture driver using the Smart Channel Control module.
- Mount the Smart Channel Control module securely in the electrical box using the appropriate screws.
- Connect the SmartNet ports with RJ45 connections for connectivity.
Operation
- Manual Override Button:
- Press and release to toggle relay on/off.
- Press and hold for communication check (solid blue LED indicates communication present with RM).
- Manual On/Off Button: Use this button for manual control of the dimmer.
FAQ
Q: What do the LED colours indicate?
- Green: The relay is closed with line voltage.
- Blinking Green Cyan: The Relay is closed with no line voltage. The relay is open with line voltage.
- Blinking Cyan: The Relay is open with no line voltage.
Q: What types of cables are recommended for Smart Channel Control
connectivity?
CAT 5 cables (minimum) are recommended. The total SmartNet length should
not exceed 400 feet.
INSTALLATION INSTRUCTIONS
TIPS / NOTES
- SMARTNET PORTS – RJ45 CONNECTIONS
- STATUS LED
- MANUAL OVERRIDE BUTTON PRESS AND RELEASE = TOGGLE RELAY ON/OFF PRESS AND HOLD = COMM CHECK (SOLID BLUE STATUS LED = COMM PRESENT WITH RM)
- MANUAL ON/OFF BUTTON
- STANDARD 4″ SQUARE ELECTRICAL BOX – NOT INCLUDED
- SMART CHANNEL CONTROL MODULE
MOUNTING
- A: 2085 Humphrey Street, Fort Wayne, IN 46803
- T: 888.841.4356
- W: ToucheControls.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>