GIEC Y1005 Truly Wireless Earbuds User Manual
- June 6, 2024
- GIEC
Table of Contents
GIEC Y1005 Truly Wireless Earbuds
User manual
Bluetooth Connection Operation
Two earphones connection
- Take out the two earphones from the charging case, then theywil I power on and TWS pair automatically.
- Turn on the bluetooth of the mobile and connect with GIEC Yl005.
Single earphone connection
AfterTWS paired and connect with mobile successfully, the earphone can be
switched at random.
Two abnormal connection
Take outthe earphonesfrom the charging case and long press the button for4s to
make the earphones enter into pairing mode(red light and blue light flash
alternately),then double dick the two earphone to finish TWS pairing (LED blue
light and red light flash at thesame time).Connectwith the mobile bluetooth
after the light flashes on left earphone.
Charging Battery Display
- Percentage battery display(Chargeforthe charging case) The battery shows from 0% to 99% with lHZ flash. The light turns on when the battery is 100%
- Discharging Battery Display(Charge for the bluetooth earphones) The battery shows from 100%to 1 %. The screen turns off when run out of battery.
- Discharging usage(charge for the bluetooth earphones) Discharge: the charging case charges the bluetooth earphones. When the bluetooth earphones are fully charged, the charging case will
automatically enter into the sleep state with low power consumption. The overall power consumption is less than lODuA.
Earphone Usage
LED indicator light
Pairing: blue and red light flash alternately. Re-connection: blue light
flashes quickly.
- Power on: blue light turns on for ls.
- Power off: red light turns on for 2s.
- Charging: red lightturnson.
Fully charged: red light turns off.
TWS pairing: red and blue light flash. TWS paired: one earphone red and blue
light flash alternatively and the other without lights. (The earphone which
connect with the mobile phone first with lights flash.} Paired with mobile:
red and blue light turn on for ls. Clear the pairing list: red and blue light
turn on for ls then red light turns on for ls.
Button Function
- Poweron: take outthe earphones and they will power on automatically with blue light turns on for ls and prompt sound.
- Power off: put the earphones into the charging case and they will power off automatically and enter into charging state with red light.
- Re-connection: take out the earphones from the charging case and they will enter into re-connection state a utomatically.(about 20s)
- Answering: double touch the button.
- Hang up: double touch the button.
- Voice dial: long touch the left/ right earphone about 2s to start up siri or other voice assistant of android mobile.
- Last song: long touch the right earphone button.
- Next song: long touch the left earphone button.
- Pause/ play: touch or double touch.
- Language shift(Chinese and English): triple touch the button in paired mode. (English version by default)
- Clear the pairing list: duringthe re-connection mode,triple touch the button and press for2s until red and blue light turn on at the same time and then turn off. Reset:the earphones will reset automatically when charging.
Parameter Information
- Product name: Tu re wireless earbuds Model:GIECY1005
- Bluetooth Program: PAU16D3 Bluetooth version: Bluetooth VS.O
- Support Bluetooth profile: “A2DPV1.3, AVRCPYl.6, AVDTPVl.3, AVDTPVL4, HFP V1.7SPPV1.2- HSPYl.2, GATTYl.O’
- Bluetooth working frequency: 2400M Hz-2483.5MHz
- The control mode: One touching button
- Speaker unit: 13mm, 32R NdFeB
- (TYP) Receiving sensitivity: -91 dBm
- Battery: 30mAh
- Musictime: About4 hours
- Talk time: About3.5 hours
- Earphone+ Charging case play time: About 24 hours
- Chargingtime: About 1.5 hour
Charging Case
- Battery: 5D0mAh
- Charging input criteria: Type-C, DCSV, SDOmA
- Charging time: About2 hours
- Charge times for earphone: 6times(Dou ble earphone charging)
Warm Prompt
- please keep the product far away from hot.
- pleasedon’t make the product be exposed bythe sunlightfor a longtime.
- pleasedon’t througt it in the fire to avoid explosion.
- Please don’t attempt to disassemble the product,becaues it don’t including any repair kits.
- Please don’t ues the product in the rain.
- lfyou don’t use it fora longtime,please put it in a dry environment and charge it at least once a month to prolong its service life.
- the dirty surface of the charging contacts may lead to poor contact,please clean itin time.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.