GIEC Z2001 True Wireless Earbuds Big Bass Noise Cancelling Headphones Bluetooth User Manual

June 14, 2024
GIEC

GIEC Z2001 True Wireless Earbuds Big Bass Noise Cancelling Headphones

Bluetooth

First Time Use

First Time Use, Activate The Earbuds

GIEC-Z2001-True-Wireless-Earbuds-Big-Bass-Noise-Cancelling-Headphones-
Bluetooth-fig-1

  1. Put the earbuds into charging case.
  2. Put the earbuds into the charging case, close the charging case for 3 seconds.

Turn On

GIEC-Z2001-True-Wireless-Earbuds-Big-Bass-Noise-Cancelling-Headphones-
Bluetooth-fig-2

  • Open the charging case, earbud’s orange and green light flashes alternately for 1 second, then green indicator light flashes, earbuds are ready to pair.

Pair

GIEC-Z2001-True-Wireless-Earbuds-Big-Bass-Noise-Cancelling-Headphones-
Bluetooth-fig-3

  • Turn on the Bluetooth on phone, choose “GIEC UniAiR” to connect.
  • After successfully connecting, L/R earbuds green indicator light is on for 1 second then off. Also earbuds will have prompt tone.

Play Music

  • Play/Suspend: Double-tap on either earbud

Change Music


  • Next Track: Long press R earbud 2 seconds.
  • Previous Track: Long press L earbud 2 seconds.

Call

  • Answer/End A Call: Double-tap on either earbud.
  • Reject A Call: Long press either earbud 2 seconds.

Active Voice Assistant

  • Triple-tap on either earbud.

Switch Music / Game Mode

  • Quadruple-tap on either earbud.

Volume Adjustment

  • Volume Up: Tap once on R earbud.
  • Volume Down: Tap once on L earbud.

Product Overview

GIEC-Z2001-True-Wireless-Earbuds-Big-Bass-Noise-Cancelling-Headphones-
Bluetooth-fig-22

Using Instruction

Turn ON / OFF

  • Turn ON
    1. Open the charging case, earbuds automatically turn on.
    2. Long press both earbuds 2 seconds.
  • Turn OFF
    1. Put the earbuds in the charging case and close it, earbuds automatically turn off.
    2. Long press L/R earbud 5 seconds to turn off L/R earbud.

Bluetooth Connection

  • Open charging case( or pick up two earbuds), when L/R earbud orange green indicator light flashes alternately, the earbuds are ready to pair.
  • Turn on the bluetooth function on your device(mobile phone) to search, choose “GIEC UniAir” on the bluetooth list to pair.
  • When the indicator light on earbuds turn off, earbuds successfully connect with your device.

Mono Mode

  1. Pick up either earbud and close the charging case, then process to bluetooth connection.
  2. When you are using both earbuds, place either earbud into the charging case and close it, another earbud will be in mono mode.

Play Music

  • Play/Suspend: Double-tap on either earbud.
  • Next Track: Long press R earbud 2 seconds.
  • Previous Track: Long press L earbud 2 seconds.
  • Volume Up: Tap once on R earbud.
  • Volume Down: Tap once on L earbud.

Call

  • Answer A Call: Double-tap on either earbud.
  • End A Call: Double-tap on either earbud.
  • Reject A Call: Long press either earbud 2 seconds.

Active Voice Assistant

  • Triple-tap on either earbud.

Switch Music / Game Mode

  • Quadruple-tap on either earbud.

Low Battery Alert

  • Earbuds
    • When the earbuds battery ≤15%, a voice prompt will appear.
    • When the earbuds are running low on battery, they will automatically turn off.
  • Charging Case
    • When charging case battery ≤15%, green indicator light of charging case will flash.

Charging

  • Earbuds
    • Place the earbuds into charging case, the charging case will automatically charge the earbuds, the LED indicator light on charging case keeps on. When the earbuds are fully charged, the LED indicator light on charging case is off.
  • Charging Case
    • Charge the charging case via Type C cable.
    • When charging case power in 0-25%, the first LED indicator light flashes.
    • When charging case power in 25-50%, the first LED indicator light keeps on, the second LED indicator light flashes.
    • When charging case power in 50-75%, the first and second LED indicator light keeps on, the third LED indicator light flashes.
    • When charging case power in 75-100%, the first ,second and third LED indicator light keeps on,the fourth LED indicator light flashes.

Specifications

  • Product Name: UniAir
  • Product Model: GIEC Z2001
  • Materials: ABS+PC
  • Bluetooth Range: ≥10m
  • Bluetooth Version: V5.3
  • Net Weight: about 50g
  • Charging Case Capacity: 400 mAh
  • Earbuds Capacity: 25 mAh
  • Input: 5V/300 mA
  • Frequency: 2402-2485MHz

FAQS

  • Earbuds can not connect with the mobile phone, how to deal with it?
    • First, please confirm that whether the earbuds are in pairing status, when the earbuds are in pairing status, the orange and green indicator lights of L/R earbud flash alternately.
    • Second, before connecting, please make sure that the earbuds or the mobile phone has not connected with other devices.
    • After checking above problems, still can not connect, first please tap once on L/R earbud and long press 2 seconds to turn off the earbuds.
    • Second please long press L/R earbuds 12 seconds to reset, after resetting, the green indicator light will be on 2 seconds then off. Next, long press L/R earbuds 1.5 seconds to manually turn on earbuds for pairing.

Warm Prompt

  1. Please don’t use corrosive detergent to clean the product.
  2. Please keep the product far away from hot.
  3. please don’t make the product be exposed by the sunlight for a long time.
  4. please don’t througt it in the fire to avoid explosion.
  5. Please don’t attempt to disassemble the product, because it don’t including any repair kits.
  6. Please don’t ues the product in the rain.
  7. If you don’t used it for a long time,please put it in a dry environment and charge it at least once a month to prolong its service life.
  8. The dirty surface of the charging contacts may lead to poor contact, please clean it in time.
  9. When you are using this item, please keep a distance of 15cm from implanted medical equipment (such as pacemakers, etc.).
  10. Please keep the product and accessories out of the reach of children, to avoid damaging the product or swallowing small parts.
  11. Use the product to listen music or voice call, it is recommended to adjust proper volume to avoid hearing damage. Long-term high volume may cause permanent hearing damage.
  12. Don’t use the product when you are driving, riding a bicycle, operating a machine or doing work that need to be heard.
  13. Don’t use the product in thunderstorm weather, product may abnormally work in thunderstorm weather and increase the risk of electric shock.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC STATEMENT

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals