GIEC SC015 Indoor Security Smart Camera User Manual

June 10, 2024
GIEC

GIEC SC015 Indoor Security Smart Camera User Manual
GIEC SC015 Indoor Security Smart Camera

Thank you for purchasing Smart Camera. Get started using your new devices by downloading TuyaSmart, one convenient app that manages everything straight from your phone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips

What’s in the Box

  • Smart Camera x1
  • USB Cable xl
  • User Manual xl
  • Mounting Bracket x 1 *
  • Adapter xl *
  • Screw bag x1 *

Different products have different accessories, please refer to physical packing.

Get Ready

  • Know your Wi.Fi network and password
  • Make sure your mobile device is running IC/S®11 or higher or Android rIA 6.0x or higher
  • Make sure you’re connecting to a 2.4GHz Wi-Fi network (It can’t connect to 5Gliz networks)

Download the TuyaSmart app from App Store or Google Play.


Register an account on your TuyaSmart app

STEP 1. Enter your mobile phone number or email address.

STEP 2. Enter the verification code and create a password.

Plug in

How do I reset my device?

  • Press the Reset Button (as Pic 1) for several seconds until camera starts to beep.
  • Optional: Insert Micro SD card as shown in Pic 1.

Add device

  • Open TuyaSmart APP, dick “+” on the top right corner of the page “HOME”, then select “Smart Camera”.

  • Make sure the indicator light on the device is lashing red quickly, then press “Next Step”.

  • Enter your “Wi-Fi network and password”, dick “OK”,

  • Read the instruction about -Scan with the camera”. click “Continue’.

  • Scan the OR Code on your phone with camera. Heard a prompt tone. dick “Heard the beep”.

  • When the indicator light on the device turns from lashing red light to steady green light, the network configuration is complete.

  • Please refer to the specific APP interface if there are any difference.

Frequently Asked Questions

1 can i share with family and friends?

Yes, you can share your cameras with family and fiends who will have access to view the camera and control your bulbs, plugs, and other devices. In the app, press the Profile button and click on the “Home Management” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account,

2 What’s the Wireless Range?

The range of your home WiFi is heavily dependent on your home router and the conditions of the room, Check with your router specifications for exact range data,

3 How many cameras can I control?

TuyaSmart app can control an urfimiled amount of devices in an unfimited amount of focations, Your router may have a Imit of how many devices can be connected to one router,

My device can’t be connected to network with App

  • Make sure the device is under the config status (indicator ight is flashing quiclly)
  • Make sure the WiFi is available and not too far away from router
  • Make sure the WiFi password you input is correct,

My device shows offline in my App

  • Make sure the device is powered on
  • Make sure the network is stable and the Wii name and password not modified. If not, add device again.
  • F the network is normal, but its stil offfne, Check if there are too many WiFi connections. You can restart your router to check the status of the device,
    • You can find much more useful information in the Help Center on App.
    • Itis recommended that the device be installed at a height below 2M.
    • Operating temperature -10~ 45°”, Operating humidity $95%
    • Frequency Range: 2.412-2.462GHz, RF Output Power; 17.5 d8m

installation instructions

  1. Take out all accessories and arrange them in order

  2. Paste the positioning sticker on the installation area, such as the wall,
    ceiling or table, and drill 3 holes on the wail with a drill using a diameter
    of 6mm, Drive in three expansion screws in sequence to fully secure the

  3. base.
    Align the bottom of the camera’s main body, and aim to the right angle,

  4. Then rotate and snap it into the base until it is completely fixed.
    Insert the Micro-USB end into the camera interface, and connect the
    USB end to the adapter. Finally insert the adapter into the socket, then the device will run with power supply.

Technical Specifications

  • Audio: Intemal Speaker and Microphone
  • Storage: supports up to 128G Micro SD card (not induded)
  • WiFi: IEEE 802.11b/gin, 2.4GHz(not compatible with 5GHz WiFi networks)
  • Power. General 5V Direct Current 1A, symbol means direct current

warning

Federal Communications Commission (FCC) Declaration of Conformity

FCC Caution: Any changes or modifications not expressly approved by the parly responsibie for ‘compliance could void the user’s aulhoily to operate this equipment.

This device complies with Pert 15 of the FCC Rules.Operation is subject to the flowing two ‘conditions: (1) This device may net cause harmfU interference, and (2) this device must accept any Interference received, induding interference that may cause undesired operation,

Note: This equipment has been tested and found to comply withthe limits fora Class B distal device, pursuant to part 15 of the FCC Rules,These limits are designed to provide reasonall protection agains! harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, f notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur in a particular installalon, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and an, the user Is encouraged fo ty to correct tha interference by one oF more af the following

  • Reorient or relocate the receiving antenna,
  • norease the separation belween the equipment and receiver

Connect the equipment into an outlet on a circutifferent from that to which the receiver is connected,
Consul the dealer or an experienced radia/TV technician for help,
Radiation Exposure Statement
This equiment complies with FCC radiation exposure Kits set forth for an uncontrolled rolled environment. This equipment should be installed and operated with minimum distance 200m between the radiator and your body, Important Note
Tris radio module must not installed to codocate and operating simultaneously with other radios in host system except in accordance with FCC muftstransmitter product procedures, Additional testing and equipment authorization may be required to operating simultaneously with other radio.
‘The avallabiliy of some specific channels andior operational frequency bands are country dependent and are firmware programmed atthe factory to match the intended destination. The firmware setting is not accessible by the end user,

Declaration Of Conformity European Notice

Hereby, Ningbo Lingzhu Technology CO,, Ltd, dedares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU,2011/65/EU.

This product must not be disposed of as normal household m waste, in accordance with EU directive for waste electrical and electronic equipment (WEEE 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point.

The device could be used with a separation distance of 20cm to the human body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals