MerchSource 1014046 Square Bluetooth Speaker User Manual
- June 6, 2024
- MerchSource
Table of Contents
MerchSource 1014046 Square Bluetooth Speaker User Manual
Main functions of the product
- indicator light Display Bluetooth connection/lithium battery working status
- charging port Universal MICRO USB charging port
- power on key Power on left, power off right
- up and down curve key Long press + for next song/next radio station, long press – for next song/next radio station
- volume up and down Short press + gets louder, short press – gets quieter
- pause/play button Press the play button to pause or play
- mode key Short press the M key to switch functions: radio, Bluetooth, TF card, U disk
- phone key Double-click pause spindle to pull out the current phone, short press to answer the phone
- TF card slot Support for ultra-high capacity 32GTF CARDS
- U disk Support U disk reading function, up to 32G
Product operation
Bluetooth connection
- turn the power switch of the Bluetooth speaker to the ON side to start the speaker power, and the speaker will be prompted by voice when it is opened, and then “Bluetooth mode” will be prompted, and the blue light flash represents the speaker entering the Bluetooth search state.
- open Bluetooth or other Bluetooth devices on the mobile phone, search the Bluetooth name: ISB20, click to pair, and music can be played after a successful connection.
telephone answering/dialing operation
- after the pairing of Bluetooth speakers is successful, double-click the pause button on the product to call back the last outgoing phone number and press to hang up;
after a successful pairing of Bluetooth speakers, long-press eject button,
short press the pause button to answer calls, and then press again to hang up.
TF card playback
insert the TF card into the slot of the card. When a voice prompt occurs, the speaker will automatically play the music on the TF card, and the speaker will automatically read the audio files on the card. Users can use the speaker button to control the playing of music.
FM radio mode
short press mode key to enter radio mode, long press adds or subtract key to
change the channel.
USB player (USB disk)
insert the USB flash drive into the slot of the card. When a voice prompt occurs, the speaker will automatically play music on the USB flash drive, and the speaker will automatically read the audio files in the USB flash drive. Users can use the speaker button to control music playback. Support U disk reading function, up to 32G
Product parameters
Speaker: 3 OHM, 3W
Battery: 400 mah
Solution: Bluetooth 5.0+EDR
Input voltage and current: 5V/ 0.5a
Warnings:
If the size of the product is sufficient, it should be printed on the product.
If the product is too small to carry the 15.19 warning, it should be included
in the manual and printed on the outer package or movable label of the product
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.