MerchSource 1007120 RC Robotosaur Dinosaur with Built-in Mood Sensors and Color-Changing LED Eyes User Manual
- June 5, 2024
- MerchSource
Table of Contents
MerchSource 1007120 RC Robotosaur Dinosaur with Built-in Mood Sensors and
Color-Changing LED Eyes
RC ROBOTOSAUR
Congratulations on your purchase of the RC Robotosaur. Your new friend will
take you on adventures doing all kinds of amazing things. He will protect your
room tool But beware, he can get a bit cranky and tends to roar when he
doesn’t get his way! Keep this instruction manual, as it contains important
information for future reference.
SAFETY WARNINGS
- Read all safety warnings before use.
- Use this product only for its intended purpose.
- This product has no user serviceable components. Do not disassemble.
- Inspect the product before every use. If the product appears damaged in any manner, discontinue use and discard.
- For indoor use only.
Alkaline Battery Warning
- Do does not mix old and new galleries
- Do not mix alkaline, standard (carbon-zinc). or rechargeable batteries
- Alkaline bBllerles are recommended. Use only the specified voltage.
- Insert batteries using the correct polarity. Always use, replace, and recharge Qf applicable) batteries under adult supervision.
- Do does not charge wh non-rechargeable batteries.
- Do not short-circuit that supply them,an.
- Do not dispose of batteries in fire, batteries may explode or leak.
- Remove batteries before storing.
- Recycle or dispose of batteries according to federal, state, and local laws.
CONTENTS
CHARGING YOUR ROBOTOSAUR
Your Robotosaur has a 3.7v 500 mAh rechargeable internal lithium battery. Although it comes with some charge, you need to charge it 60 minutes before use.
- Plug the included custom USB cable into the tail port and then to a device (laptop) or adapter for a wall outlet.
- When the red light on the USB turns off, it is fully charged. Store the USB cord.
REMOTE BATTERY INSTALLATION
- Hold the POWER button for 3s to turn off remote.
- When red LED flashes, batteries are low. Please replace the remote batteries for optimal performance.
- If remote is not used for 15 minutes, it will auto shut-off. Press the POWER button again to switch back on.
- When blue LED ring on belly is flashing, Robotosaur’s rechargeable battery is low. Please plug in using the included USB charging cable to recharge the battery.
- If Robotosaur is awoken from SLEEP and the remote is still on, the remote will pair automatically with Robotosaur. However, in other disconnection situations, please tum off and on both Robotosaur and the remote to ensure the 2 are paired. Robotosaur is shipped in Try-Me mode. To activate full play mode, turn Robotosaur off and back on again.
Rechargeable Battery Warning
- This product contains batteries that non-replaceable.
- There is a risk of fire and personal injury if the battery is punctured, damaged or misused.
- Do not dismantle, crush, Incinerate or short–clrcutt battery.
- Never expose the battery to extreme temperatures or moisture
- Keep away from flammable materials and direct sunlight.
- Only charge using the provided charger, cable, and/or adapters.
- The rechargeable battery is only to be charged by an adult.
- Adutt Supervision of the gallery, while it is charging, is required
- Allow battery la cool to room temperature before charging.
- Charge on a non-flammable surface and keep away from flammable products Discominue charging battery becomes hot, swells, smoke, or gives off a strong odor.
- Battery chargers used with Iha products are to be regularly examined for damage to the cord, plug, enclosure, and other parts, and In the event of such damage, they must not be used until the damage has been repaired.
- Recycle or dispose of battery according to 1ederal. slate. and local laws
- Keep these Instructions for future reference.
MAKING YOUR ROBOTOSAUR GO
Press the POWER Button on the remote and slide the tail switch ON. When the blue light on your Robotosaur’s belly is on and his eyes are green, the remote is connected and he is ready to play.
overview
-
GO FORWARD
PUSH AND HOLD BOT JOYSTICKS UP -
GO BACKWARD
PUSH AND HOLD BOTH JOYSTICKS DOWN -
SPIN CLOCKWISE
PUSH AND HOLD THE LEFT JOYSTICK UP AND RIGHT JOYSTICK DOWN -
SPIN COUNTERCLOCKWISE
PUSH AND HOLD THE LEFT JOYSTICK DOWN AND RIGHT JOYSTICK UP -
TAP BOTH JOYSTICKS UP TO SIT.
HE MAY WONDER IF YOU THINK HE’S A DOG! -
ATTACK
-
PRESS THE ATTACK BUTTON.
HE TURNS HIS HEAD, ROARS, AND SPINS AROUND LOOKING TO MAKE TROUBLE! PET HIS NOSE ONCE TO SOOTHE THIS SAVAGE BEAST AND MAKE HIM HAPPY! -
ROAR
-
TAP THE ROAR BUTTON.
HE CURIOUSLY OPENS HIS MOUTH. HOLD THE ROAR BUTTON.
NOW HE’S REALLY UPSET.
HE TURNS HIS HEAD AND ROARS! -
HUNT
PRESS THE HUNT BUTTON.
HE GOES AROUND LOOKING FOR HIS PREY. WHEN HE FINDS SOMETHING, HE ROARS! -
STOMP
TAP THE LEFT JOYSTICK UP AND RIGHT JOYSTICK DOWN OR THE RIGHT JOYSTICK UP AND LEFT JOYSTICK DOWN.
NOW YOU’VE DONE ITT HE KICKS HIS LEGS BACK AND FORTH IN A PREHISTORIC HIGH- TECH RAGE! -
GUARD
PRESS THE GUARD BUTTON OR PET HIS NOSE TWICE.
HE SPINS AND LOOKS AROUND FOR SOMETHING TO ATTACK -
COME
FACE THE REMOTE CONTROU.ER TO THE ROBOTOSAUR AND HOLD THE COME BUTTON.
HE WILL FOLLOW YOU AROUND/ PRAISE HIM BY PETTING HIS NOSE AND HE WILL WAG HIS TAIL /ENJOY -
SNORE
YOU WILL KNOW ROBOTOSAUR IS SNORING BECAUSE HIS EYE COLOR TURNS BLUE AND HE MAKES A YAWNING AND SNORING SOUND. ANY OPERATION FROM REMOTE WILL WAKE HIM UP.
IF HE SNORES FOR A LONG TIME {ABOUT 2.5 MINUTES), HE WILL GO INTO SLEEP MODE. TOUCH HIS NOSE TO WAKE HIM, BUT BEWARE THAT SLEEPING CAN TURN HIS SNORE INTO A ROAR! -
RECHARGE
WHEN THE BLUE LEO RING ON BELLY IS FLASHING (INSTANT IN/OUT), IT INDICATE LOW POWER AND NEED TO BE CHARGED -
MOOD
HE CAN BE VERY MOODY. HIS EYES WILL ALWAYS TELL YOU WHAT’S ON HIS MINDI
WARNING: Changes or modifications to this unit expressly of”OV8d by the party responsible for compliance could void the -• authority to operate the equipment.
FCC Rules
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found la comply wh the lims for a
Class B digital device, pursuant to Part 1 5 of the FCC Rules. The limits are
desigr>ed la provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses ar.d can radiate
radio frequency erargy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on the is encouraged to try la correct the Interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and receiver.
- Connect the equipment into an ocrt!et on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.