MECOOL KD1 Android TV Stick User Manual

MECOOL KD1 Android TV Stick

Package contents

• Android TV Stick
• USB Y-Cable
• USB Power adapter
• User manual
• Remote control
•  HDMI extension cable

Product Overview Android TV Stick

• HDMI connector – Connect to an HDMI port on a TV
• LED –Display the status of the TV stick
• Micro USB port – Connect the Micro USB connector to this port

USB Y-CABLE

• Micro USB connector – Connect to the Micro USB port on the TV Stick.
• USB power connector –Connect to USB power adapter.
• IR Receiver-Use of the IR receiver to control the TV stick with its remote control when the TV stick in IR mode.

Voice Remote Guide

Before you begin, locate the 2 AAA batteries for the mecool TV stick Remote. Insert the 2 AAA batteries into the TV stick Remote control.

Get Started

Connect the TV Stick to your TV

1. Plug the TV Stick into an HDMI port on your TV. If the TV dongle does not fit, need to use the HDMI extension cable.
2. Connect the micro-USB cable between the Stick and the included power adapter. Plug the power adapter into an A/C power outlet.
3. Turn on your TV, then press the TV’s Input or Source button to select the HDMI input that the TV stick is connected to. The LED on the TV stick lights and the remote control pairing screen is displayed on your TV.

Connect to Network

Mecool TV stick requires a wireless connection. Connect your device to the Internet to access movies, TV shows, games, and apps. The TV Stick will automatically detect wireless networks in your area. Select your network and enter the password to connect.
Note:

• For optimal wireless performance, do not place your TV Stick in an enclosed cabinet, as it impacts signal strength to the device and remote control.
•  For TV Stick, use the HDMI extender if your TV Stick is blocked by an object that may impact signal strength to the device and remote control.

Sign in to your google account

To use Google Assistant, Google play store, you must sign in to your Google Account.

System settings function:

Change the system language Open Settings-Device Preferences-Language to select system language.

Firmware Update

Run the update app,select OTA update, the device will detect and update to the latest verison.

Note: DO not power off the device during updating process. Please do not download any third party software to upgrade.This product belongs to genuine system. The upgrade will only be operated through OTA,or please contact the seller to upgrade.

Factory data reset

Open “Settings-Device Preferences-About-Factory Reset”, be carefully to do this, after factory data reset, all data will be erased.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelinesThis equipment should be installed and operated with minimum distance of 20cm th e radiator your body.This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

Troubleshooting

In any case, please do not open it by yourself or try to repair the TV stick, so as not to invalidate the warranty. If any problems occur, you can check them first by referring to the methods listed below. If you are unable to resolve the issue through the list below, please contact the dealer for assistance.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communicationsHowever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions;

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &your body Google, Android, You Tube.Android TV and other marks are trademarks of Google LLC.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>