Kapandria TrueCost Power Consumption Analyzer User Guide
- June 5, 2024
- Kapandria
Table of Contents
Kapandria TrueCost Power Consumption Analyzer User Guide
Thank you for purchasing TrueCost Power Consumption Analyzer We hope you will enjoy it! To ensure correct operation, Please read this user manual carefully.
Technical Specifications
| Dimensions | H60/W38/L90mm |
|---|---|
| Weight | 210gr |
| Input Voltage | 100-240VAC |
| Power Consumption | 3W |
WIFI802.11b/g/n
In the box
- One trueCost – power consumption analyzer
- One main power cable
- three sensors
TrueCost Installation
TrueCost Connection
step 1:
Install and run the True cost application on your smartphone:
step 2:
Approve the two check box privacy&policy,Terms&condition and Approve.
Optional: save your SSID info in your smartphone.
step 3:
Application will restart and the TrueCost power consumption analyzer will
start sending data to the application.
3 Phases screen
This screen shows a graphic power consumption results at each phase separately.
Control budget
User may define a monthly budget, TrueCost implements it and presents the budget left overs in real-time,You can change the budget any time.
Hour-Day-Month
True Cost displays 24/7 the real-time hourly,daily,or monthly kW/h cost in $.
Save & Email
You can save your bill directly to your PC or Smartphone and send it from TrueCost app using Email, Whats App or any other social media application.
FCC Statements
Caution:
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
support@kapandrianet.com
Phone:+972-46180293
www.kapandriant.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>