BOSCH SMS4HMI07E-30 Dishwasher User Guide

BOSCH SMS4HMI07E-30 Dishwasher

Product Information

The product is a dishwasher with various features and settings. It can be connected to a mobile device using the Home Connect app, allowing users to conveniently change settings. The dishwasher has an adjustable water hardness setting and a dispenser for special salt and rinse aid. It offers different programs with varying durations, energy consumption, and water usage. The appliance also has a Machine Care feature for maintenance.

Product Usage Instructions

1. Setting up Home Connect:

2. Install the Home Connect app on your mobile device and follow the instructions.

3. Scan the QR code with the Home Connect app.

4. Overview of water hardness settings:
   Refer to the instruction manual for a table of country-specific units.

5. Adding special salt:

6. Unscrew the lid of the dispenser for special salt and remove it.

7. On initial start-up, fill the dispenser with water.

8. Add the special salt to the dispenser. Do not add detergent.

9. Place the lid back on the dispenser and turn to close.

10. Adding rinse aid:

11. Press the catch on the lid of the dispenser for rinse aid and lift it.

12. Add rinse aid up to the max mark.

13. Close the lid of the dispenser for rinse aid until it clicks into position.

14. Setting the water softening system:

15. Press the appropriate button to open the basic settings.

16. Press the button for 3 seconds until the display shows Hxx.

17. Press the button repeatedly until the desired water hardness value is set.

18. Press and hold the button for 3 seconds to save the settings.

19. Programmes:
    Select the desired programme based on the duration, energy consumption, and water usage provided in the programme data. The consumption figures may vary depending on additional functions selected and the use of rinse aid.

20. Using the appliance:

21. Load the tableware, ensuring it is suitable for dishwashers and removing large food remnants.

22. Add detergent to the dry detergent dispenser.

23. Switch on the appliance.

24. Select the desired programme.

25. Start the programme.

26. Remove the tableware at the end of the programme.

27. To cancel the programme, press and hold the cancel button for approximately 4 seconds. The programme will be cancelled after about 1 minute.

28. Cleaning filters:
    After each wash, check the filters for cleanliness and perform any necessary cleaning.

Before using it for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip : Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here. A table of country-specific units can be found in the instruction manual.

Setting the water softening system

1. Press ⁠.
2. To open the basic settings, press for 3 seconds.
   • The display shows Hxx.
   • The display shows ⁠.
3. Press repeatedly until the right water hardness has been set.
4. To save the settings, press for 3 seconds.

Programmes

The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The runtime will change if the rinse  aid system is switched off or rinse needs to be added

Quick reference guide

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid and lift ⁠
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid.
   • The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser.
   • The lid clicks into position

How to use your appliance

1. Load the tableware.
   • Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.
2. Add detergent.
3. Switch on the appliance
4. Select the programme.
5. Start the program ⁠.
6. Remove the tableware at the end of the programme.
7. To cancel the programme, press for approx. 4 seconds.
   • The programme is canceled and ends after approx. 1 minute.

Cleaning filters

1. After each wash check the filters for residue.
2. Turn the coarse  filter anticlockwise and remove the filter system
3. Pull down the microfilter to remove it.
4. Press the locking catches together and lift the coarse filter out
5. Clean the filter elements under running water.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm and pull down to remove
2. Pull up the lower spray arm to remove it.
3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
   • The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a spoon and grip it by the crosspiece.
5. Lift the pump cover inwards at an angle and remove it.
6. Remove any remnants of food and foreign bodies in the area of the impeller.
7. Insert the pump cover and press down ⁠.
   • The pump cover clicks into position.
8. Install the filter system.

Troubleshooting

Fault Cause and troubleshooting

1. Switch off the appliance.
2. Pull out the mains plug.
3. Turn off the water tap.
4. Unscrew the water connection.
5. Remove the filter from the supply hose
6. Clean the filter.
7. Re-insert the filter in the supply hose.
8. Screw the water connection back on.
9. Check the water connection for leaks.
10. Restore the power supply.
11. Switch the appliance on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>