YABER ACE K1 Projector 650 ANSI Ultra Bright Home Theater Movie Projector User Manual

ACE K1 Projector 650 ANSI Ultra Bright Home Theater Movie Projector
User Manual

ACE K1 Projector 650 ANSI Ultra Bright Home Theater Movie Projector

YABER Lifetime Professional Support
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have any issues, email your order number and the problem to [email protected] We will provide a fast solu­ tion in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, blue­ tooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We prom­ ise all the projectors have been 100% carefully checked and packaged before shipping. If you have any questions, could you please contact us so that the problem can been solved.
And give us an opportunity to improve. We guarantee we will provide you a satisfactory solu­tion.
Thanks for your understanding!
YABER Service Team
Tips

1. Do not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be 5 C-35 C better.
2.  If there are black spots on the projection screen, please don’t worry, please contact [email protected] via email, we can send you a video about how to remove the dust.
3.  The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
4.  Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

Package List

Projector Specifications

Model No. Ace K1|
---|---
Native Resolution| 19201080P| Keystone Correction| Auto/Manual Vertical& Horizontal
Display Technology| LCD| Light Source| LED
Color Game| 55% NTSC| Aspect Ratio| 4:3/16:9
Recommended Projection Distance| 3.8-21.9ft| Minimum Projection Distance| 3.8ft
Power Voltage| AC100-240V| Projector Weight| 8.6Ib
Picture File| JPG/JPEG/ BMP/PNG| Interfaces| HDMI2/USB*2/3.5mm Headphone jack/AV
Projection Method| Front/Rear on Desk, Front/ Rear on Ceiling
Video File| MP4/MKV/WMV/3GP/MPG/V0B/TP/TS/DAT/MOV/FLV
Audio File| MP3/AAC/WAV/WMA/M4A/AAC/OGG/FLAC

Projector Overview

Down Key
Left Key
Right Key

Remote Control

twice in succession: select 16:9/4:3 projection
Auto focus/keystone| Adjust focus and keystone
Volume +| Volume up
Volume­| Volume down
Mute| Close the sound
Homepage| Enter the home page
Confirmation key| Confirm the option/Play or pause the video
Back| Enter the home page
F+| Focus+
F­| Focus –

Note:

1. Install 2 pieces of AAA batteries into the remote controller before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
2.  When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
3.  If you are not using the remote controller for an extended period, please take out batter­ies to prevent batteries leakage.

Installation

1. Installation Method
   The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements.
   In addition, the projector can be installed with following methods: Keep the projector at a height where its lens is axial symmetry to the screen. If this is not pos­sible, use the keystone correction function to adjust the projection image. If you want to get a free projection screen, please contact us via [email protected].

Aspect Ratio: 16:9

Distance (ft.)| Screen Size
3.8| 35°
5.5| 50
7.6| 70″
10.9| 100″
13.l| 120″°
16.4| 150°
21.9| 200°

The recommended projection distance is about 1O9ft,the shortest projection distance is 3.8ft.
The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.

2. Install on the Ceiling
   The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with following methods:

1. Please purchase an universal projector ceiling mount;
2. Remove the four rubber pads on the bottom of the projector, you will see the screw holes and use the M5*11mm screws for installing the ceiling, and then install it.

Starting Projector

1. Press the power key on the remote controller or projector, the indicator light will turn blue.
2. Use the focus function of the projector to get the best image performance.(If it is still blurry, please try to adjust the projection distance.)
3. Use the keystone function of the projector to get a rectangle projection screen.
4.  Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal.
5.  Select the” ” menu,enter the [ Other Setting],then you can select the option [ Language Setting] to set your preferred language.

Image Adjustment

When using the projector for the first time, it normally displays an unclear image. This is due to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:

1. Focus Adjustment When you start the projector, please wait patiently for 2-3 seconds the projector will adjust focus automatically. if the image is not clear,you can press the focus buttons “F+”, “F-” or auto focus keystone key on the remote controller to adjust the focus of the lens, tap or long press the focus button until the image is clear.
   Note: If it is still blurry, please try to adjust the projec­tion distance.

2. Keystone Correction
   You can use the automatic keystone correction or digital 4D keystone correction of the pro­jector to change the image to be rectangle(vertical and horizontal). Detail please refer the page 17 of this manual.

Setting Up The Projector

The projector’s home page is as follow.

1. Select The Insert Signal Source
   Select the desired insert signal source (HDMll/HDMl2/AV) on the home-page.

2. USB Disk Input Mode
   2.1 Play Video/Music/Photo/Office Suite in the USB Disk Insert Mode
   1. Insert the USB Disk, the [USB] icon of the homepage will turn white.
   2. Select the option [ Video/Music/Photo/Office Suite].
   3. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [OK] button to play it. PS:
   1. The Ace Kl upgraded projector supports U disk to directly play PPT, Word, Excel files.
   2. If you enter from the [Video] menu, you can only play the video, The same as other 3 options.
   2.2 Play Interface Menu| Function
   ---|---
   | Select play mode (directory play/single cycle/directory loop)
   | Switch to the previous video
   | Fast Backward, rewinds the video back quickly while playing it. The rewinding speed ranges from 2X to 32X
   | Play or pause the current video
   | Fast Forward, pushes the video to move forward quickly while playing it. The forward speed ranges from 2X to 32X
   | Switch to the next video
   | Select all playlists in the current folder
   | Playing settings
   Playing settings| Include| Function
   ---|---|---
   Video subtitle| close, inner, external| Set multiple modes of video subtitles
   Breakpoint play| close, open| You can set the video continue to play from the point where it was stopped
   Audio track| Audio track| You can see the audio information
   Display mode| 16:9,full,over,auto,4:3| You can set the video aspect ratio
   Picture settings| Picture Mode, Color Temperature, Reset to Def au It| You can set the picture information
   Sound settings| Sound Style, Equalizer Detail, Reset to Default| You can set the sound information
   Menu| Content| Mode| Function
   ---|---|---|---
   Picture Mode| User/Standard/Vivid/ Sport/Movie/Game| Brightness| Modify the picture parameters in the range 0-100
   Energy Saving
   Saturation
   Sharpness
   Sound Style| User/Standard/Vivid/Sports/Movie/Musici News| Balance| Modify the sound parameters in the range 0-100
   Bass
   Treble

2.3 Music Play Interface

2.4 Picture Play Interface

3. WiFi Setting
   Wireless Connection
   Warming Tips:
   1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of l00Mbit or more is recommended when using screen mirroring.
   2. Make sure your mobile device is close to the projector when using wireless connection. A distance within l meter is recommended.
   3. Some mobile devices may not support screen mirroring due to the compatibility.
   4. Any questions, please feel free to email YABER via [email protected].
   3.1 iOS Cast (for iOS Devices)
   1. Go to home page — Select the [@] menu — Select the [ WiFi] menu– Open the WiFi func tion — Select your home WiFi from the list — Connect the Ace Kl projector to your home WiFi.2. Back to home page — Select [ iOS Cast ] menu — Press the OK button to enter the [ iOS Cast ] menu.3. Select the [Settings] menu on your iOS device –Turn on the [ Wi-Fi] function — Connect your iOS device to the same home network as the projector.
   4. Open the [ Control Center] on your iOS device — Select the [ Screen Mirroring] function -­ Select and connect the iOS Cast receiver named [Ace Kl- xxxx] — your iOS device screen will be displayed on the projection screen after 3 seconds.
   3.2 Miracast (for Android Devices)
   1. Go to home page — Select the [ Mira cast] menu — Press the OK button to enter the [ Mira­ cast ] interface.2. Select the [Settings] menu on your Android device — Select the [ Screen mirroring ] func­ tion — Select your Miracast receiver named [ Ace Kl-AnCast-XXXX ]– your Android device screen will be displayed on the projection screen after 3 seconds.3. On your Android device, tap [Settings] -[ WLAN Display ] -Turn [ Wi-Fi] ON, Connect your home WiFi.
   Note:
   1.Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone’s manual. [ Multiscreen/Wireless display/WLAN display/Screen mirroring/Wireless projection/Smart view etc.] 2. Not all Android phones support this function. Please make sure it is supported before use.

4. Bluetooth Setting
   Go to home page — Select the [ ] menu — Select the [ Bluetooth ] Option — Open the Bluetooth function and your Bluetooth device — Scan the Bluetooth devices nearby auto­ matically– Choose the Bluetooth device desired — it will be paired and connected automat­ icily.Note:
   l. The Ace Kl projector is compatible with the Bluetooth headsets, Bluetooth speakers and AirPods,
   but not the Bluetooth keyboards or Bluetooth phones.
   2. lf you have any question, please feel free to email YABER via: [email protected].

5. Projector Image Setting
   5.1 Projection Mode5.2 Automatic Keystone & 4-Point Keystone
   5.2.l Automatic Keystone Correction
   When you start the projector, please wait patiently for 2-3 seconds the projector will adjust keystone automatically. If the image is not rectangle, you can Use the digital 4D keystone cor­rection to change the image to be rectangle.
   5.2.2 Horizontal & Vertical Keystone Correction
   When the projection screen is not rectangular, it can be adjusted by 4-point keystone correc­tion.
   Step l: Select the [Settings] menu-select [Projection] menu- press [ Manual Keystone].
   Step 2: Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters, until the projection screen becomes the desired rectangle. OK Pick point: press the OK button on the remote controller or projector to enter the adjust­ mentinterface.
   Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters.
   Press the key on the remote controller to back to previous page.
     Press the key on the remote controller to restore the original parameters.
   ­5.3 Digital Zoom
   Step l: Select the [ Digital Zoom] option and press the OK button on the remote controller or projector to enter the submenu.
   Step 2: By pressing the button on the remote controller or projector, you can reduce the height and width of projection size up to 50%.

6. System Update
   Menu| Function
   ---|---
   Online Update| Online update
   Local Update| Local update
   Restore Factory| Restore user operation application configuration and system setting

7. Other Setting
   Menu| Function
   ---|---
   Boot Source Option| Off/H DMI/HDM 12/ AV
   Power On Option| Direct/Standby
   Language Setting| Setup the language
   Scheduled Shutdown| Off/1 Om i n/20m i n/30m in/ 60m i n/120m in

About the Direct/Standby Power On Option
Direct Mode: When the projector is powered on, the projector will be automatically turned on.
Standby Mode: When the projector is powered on, you need to press the C) button on the remote controller or projector to turn on the projector.

8. About
   Menu| Content
   ---|---
   System Version| V1.0.0.4:2022-XX-XX
   MAC Address| e0:27:6c:46:b3:51

Signal Lines Connection
YABER Ace Kl projector has 6 interfaces, HDMI ports2/ USB ports2/ 3.5mm headphone out­ put/ AV in. Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)

1. Connect USB Disk .~Hg u ask into either or the two usb input ports.
2.  You can directly enter the start-up screen on the home page, select the option [ Video/Mu­ sic/Photo/Office Suite].
3.  Select the desired file (or enter the subfolder) in the USB disk, then press the [OK] button to play it.

Connect the Devices via the HDMI ports

1. Connect your TV stick or laptop to any HDMI port of the projector.
2.  Enter the home page to select the corresponding HDMll or HDMl2 as the signal source.
3.  Connect to the DVD Player

Use the 3-in -1 AV cable in the package

1. Connect your TV stick or laptop to any HDMI port of the projector.
2. Connect the colorful female connectors to your DVD player’s RCA cable with the 3-in-l AV cable in the package.
3.  Connect the black connector to the AV port of the projector, enter the home page to select [AV] as the signal source.”
   Or connect to the DVD Player with the HDMI cable in the package.
   

Connect to the Sound bar/Speaker
If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows, enter the home page to select [AV] as the signal source.

Safe Shutdown

1. Press the (‘ button on the projector or remote controller,then press OK key to power off the projector.
2. Unplug the power cord of the projector.
3. Cover the lens and store the projector in a cool and dry place.

Warranty
Thank you so much for your purchase and support! We provide 3-year warranty for Ace Kl pro­ jector. If you have any questions, please feel free to contact us via [email protected].

https://yabertech.com/pages/download

Scan and download the PDF user manual
Where to Get More Help

[email protected]
wwwyaberglobal.com
Yaber Entertainment Projector
Yaber Entertainment Projector

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>