milwaukee HL2-LED Slim Head Lamp Instructions

: June 3, 2024
: Milwaukee

Table of Contents

milwaukee HL2-LED Slim Head Lamp
BATTERY INSTALLATION
TECHNICAL DATA
SAFETY INSTRUCTIONS BATTERY LAMP
SAFETY INSTRUCTIONS BATTERY
SPECIFIED CONDITIONS OF USE
LOW BATTERY INDICATION
MAINTENANCE
SYMBOLS
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

milwaukee HL2-LED Slim Head Lamp

milwaukee HL2-LED Slim Head Lamp-fig1

BATTERY INSTALLATION

milwaukee HL2-LED Slim Head Lamp-fig2

TECHNICAL DATA

Rated Power input: 3,5 W
Lighting time
- Mode 1 High Level: 4 h
- Mode 2 Med Level: 8,5 h
- Mode 3 Low Level: 28 h
Luminus flux
- Mode 1 High Level: 350 lm
- Mode 2 Med Level: 150 lm
- Mode 3 Low Level: 25 lm
Colour rendering index (CRI): 80
Colour temperature: 4000 K
Battery voltage: 4,5 V (3×1,5V)
Battery type: LR03 / AAA
Weight according EPTA-Procedure 01/2014: 0,1 kg
Protection class: IP 52

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or serious injury. Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS BATTERY LAMP

Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.

Don‘t use this tool in wet areas .
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

SAFETY INSTRUCTIONS BATTERY

This tool is designed to be powered by 3 LR03 / AAA batteries properly inserted into the instrument. Do not attempt to use with any other voltage or power supply.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or types within brands) of batteries.
Do not mix rechargeable and non-rechargeable batteries.
Install batteries according to polarity (+ / –) diagrams.
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it oﬀ immediately with soap and water.
In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of ﬁ re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in ﬂ uid or allow a ﬂ uid to ﬂow inside them. Corrosive or conductive ﬂ uids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The headlight is intended to be used light independent use away from mains supply. The headlight is especially designed for head mounting.
Do not use this product in any other way as stated for normal use.

LOW BATTERY INDICATION

The light will ﬂ ash three times when the battery voltage is low. In this case pleas change batteries.

MAINTENANCE

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.