WIN M5+ Smartphone User Guide
- June 5, 2024
- WIN
Table of Contents
WIN M5+ Smartphone
Insert SIM card
The phone is a Dual SIM mobile phone allowing you to use the facility of two networks. To insert SIM card(s):
- Switch off the mobile phone and remove the rear cover and battery.
- Insert the SIM card correctly in the card slot(s) (See figure below).
- Finally insert the battery and replace the rear cover of the mobile phone.
Insert Memory card
- Power off the mobile phone and remove the rear cover and battery.
- Insert the Micro SD card into the slot.
- Finally insert the battery and the rear cover of the mobile phone.
Note: Use only compatible memory cards for use with this device. Incompatible memory cards may damage the card or the device and corrupt the data stored in the card.
Charge the Batten
You can charge your battery using the charger supplied with this phone.
Note: Please use the specific battery, otherwise it may cause an explosion.
Keys and parts
- The smartphone supports 3G Card and gives you marvelous feelings to experience on Camera, Video recorder, FM radio,
- Music and Sound recorder. Let you install various APPs, games, and more (supports APK format) by downloading from Play Store.
Lock and unlock the screen
Press the power button to enter Sleep mode and meanwhile, the screen will be locked; press the power button again to wake up and then drag the lock to the right side to unlock.
Make a call
On the start, screen chooses CALL and enter a complete phone number to make a call.
Maintenance & Safety
Please read and observe the following information for safe and proper use of your phone and to prevent damage. Also, keep the user guide in an accessible place at all the times after reading it.
- After-sales service Kindly refers to the Warranty Card provided in the sales package box.
- Charger and Adapter Safety Charger and adapter are designed for indoor use only.
- Battery Information and Care
- Please use the specific battery, otherwise, it will cause an explosion.
- Please dispose of your battery properly.
- Do not disassemble or short-circuit the battery.
- Keep the battery’s metal contacts clean.
- Recharge the battery after long periods of non-use to maximize battery life.
Battery life will vary due to usage patterns and environmental conditions. The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal status. In this case, remove the battery from the phone, reinsert it, and turn the phone on.
General Notice
Using a damaged battery or placing a battery in your mouth may cause serious injury.Do not place items containing magnetic components such as a credit card, phone card, bank book, or subway ticket near your phone. The magnetism of the phone may damage the data stored in the magnetic strip. Talking on your phone for long period of time may reduce call quality due to heat generated during use. when the phone iS not used for a long period time, store it in a safe place with the power cord unplugged.
Using the phone in proximity to receiving equipment
- e. TV or Radio) may cause interference to the phone.
- Do not immerse your phone in water. If this happens, remove the battery and take it to an Authorized Service Center.
- Do not paint your phone.
- The data saved in your phone might be deleted due to careless use, repair of the phone, or upgrade of the software. Please backup your important phone numbers. (Ring tones, text messages, voiIce messages,picture, and videos could also be deleted.) The manufacturer is not liable for damage due to the loss of data.
- Do not turn your phone on or off when the phone is close to your ear.
- This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interferen- ce
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment,
FCC STATEMENT
FCC RF Exposure Information and Statement: The SAR limit of USA (FCC)is 1.523
WIKg averaged over one gram of tissue. Product, model number: XXXXX (FCC ID:
XXXXXXX) has also been tested against this SAR limit. The highest SAR value
reported under this standard during product certification for use at the head
is 0.740 Wikg and when properly worn on the body is 1.348 W/kg. The device was
tested for typical body-worn operations with the back of the handset kept
1.0cm from the body. To maintain compliance with FCC RF exposure requirements,
use accessories that maintain a 1.0 cm separation distance between the user
body and the back of the handset. The use of belt clips, holders, and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements and should be avoided. This device complies with part 15
of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation, lf this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
TO DOWNLOAD THE
www.win.com.ve
MANUAL OF THE FULL USER ENTER TO:
@win.latam
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>