Avant-Garde Labs DAF4JQ9wbO4 Memory Card Exchange Instructions
- June 1, 2024
- Avant-Garde Labs
Table of Contents
Avant-Garde Labs DAF4JQ9wbO4 Memory Card Exchange
Product Information
Specifications:
- Model: Memory Card Upgrade Kit
- Compatible with: Various devices supporting micro SD cards
- Components: Phillips (crosshead) screwdriver, micro SD card, tape
Product Usage Instructions
Step 1: Disassembly
Warning: Ensure the device is completely powered off before beginning.
- Using a Phillips (crosshead) screwdriver, remove all 10 arrow marked screws.
- Remove the front panel carefully.
- Pro Tip: Place a cloth to protect the front panel while being serviced.
Step 2: Memory Card Replacement
- With the front panel removed, locate the micro SD card on the green board and swap it with your replacement.
- Ensure the Micro SD card is fully seated into the slot.
- Pro Tip: Use some tape on top of the SD card and metal slot to prevent it from sliding out over time.
Step 3: Reassembly
- Route the 5 wires to the slot with an inch of slack on all sides before placing.
- Reinstall all 10 screws, hand tight (20 in-lb max).
Done. Great work!
Power on and test. If everything looks good, enjoy a cold drink!
Troubleshooting
- Issue: Does the white LED turn on?
- If not, ensure the battery is fully charged.
- Issue: Does the red LED turn on?
- If not, try reinstalling the original SD card.
- Issue: Does the display turn on?
- If not, press the display power button to turn it on.
Contact Information:
If you are still experiencing issues, please email us at: [email protected]
Frequently Asked Questions
Q: How do I know if my device supports this memory card upgrade?
A: Please refer to your device’s user manual or contact our support team for compatibility information.
Q: Can I use any micro SD card for replacement?
A: It is recommended to use a compatible micro SD card with similar specifications to ensure proper functioning of your device.
Memory Card Upgrade Instructions
Warning: Ensure the device is completely powered off before beginning.
Step 1
With a Phillips (crosshead) screwdriver, remove all 10 arrow-marked screws.
Remove Front Panel
Pro Tip: Place a cloth to protect the front panel while being serviced.
Pro Tip: Place a cloth to protect the front panel while being serviced.
Step 2
With the front panel removed locate the micro SD card on the green board. Swap
it with your replacement.
Step 3
Once replaced ensure the Micro SD card is fully seated into the slot as show.
Pro Tip: Use some tape on top of the SD card and metal slot in order to prevent it from sliding out over time.
Step 4
Route the 5 wires to the slot with an inch of slack on all before placing.
Reinstall all 10 screws. Hand tight (20 in-lb max).
Done
Great Work
Still Stuck? email us: [email protected]