MERCKU M6 Mesh Wi-Fi Router User Guide
- June 5, 2024
- MERCKU
Table of Contents
MERCKU M6 Mesh Wi-Fi Router
Thanks you for choosing us
Set up in 3 steps
-
Connect to the power and WAN cables
Red light indicates that there is power. When the device has an internet connection, the light will turn white. -
Connect to Wi-Fi
Use your mobile device or computer to search for and connect to the MERCKU- XXXX Wi-Fi network(no password required). -
Open browser or app
Visit mywifi.mercku.tech through a browser to complete setup. Or scan the QR code to download the app to complete the setup and manage the network.
Expand your Wi-Fi coverage
Quick tips
After setting up the M6 router, you can also add other M6 routers (nodes)
through mesh connection to expand your wireless network coverage.
Note: Do not support adding nodes in batch.
M6 nodes deployment: M6 nodes work best when they’re no more than two rooms
away from each other or the main M6 router.
-
Power the M6 node on
Please power on the node to be added and wait for another minute. Red light indicates that there is power， afterwards, the node indicator light is in solid orange. -
Press the “Connect” button of the main router
-
Press the “Connect” button of the node
Please add the node within 30 seconds, when the indicator light on the slave node flashes in blue， it indicates signal broadcasting. When both master and slave node’s indlcator lights flash white, it indlcates a successful operation.