MERCKU X6 Wi-Fi 6 Mesh Dual WAN Router Installation Guide
- June 17, 2024
- MERCKU
Table of Contents
Merck 5G
CPE
QUICK
INSTALLATION GUIDE
INSTALLATION INSTRUCTIONS
Ensure that your Mercku 5G CPE is powered off before performing the steps below.
- Insert a data-enabled micro SIM card into the SIM card slot on the bottom of the device
- Close the SIM Slot cover once the SIM is properly inserted.
- Insert the ethernet cable into LAN port I on the back panel of the Mercku5G CPE, and the other end into the ethernet port of a computer or laptop to configure the device.
- Connect the power adapter to the socket on the back panel of your Mercku 5G CPE and plug the other end into a wall outlet or power strip.
@ The Power LED wit light up to indicate that there’s power into the device tfaconnection has been established, the following LEDs will turn solid blue after minute
-Power
-LAN port I
-WFi
-Le
-WAN (if the connection is being used)
LED
The front LED panel provides a simple interface for monitoring your device.
LED INDICATIONS
The LEDs on the front panel indicate the instant status of port links, wireless data activity, system power, USB WPS, and help monitor and troubleshoot when needed.
LED | SATE | FUNCTION |
---|---|---|
POWER | 0n | |
0ff | Device is powered on Device is off | |
$G | 0n | |
0ff | G network is activated |
G network is not connected
4G| 0n
0ff| 4G/LIE network is activated
4G/LT£ network is ot connected
Wifi| 0
flash
0if| The24/GW-is activated
The device is transmitting data via24/5G wireless 24/5# W-Fi disabled
wPS| flash
0if| wPsis triggered wps connected or disabled
tenet| On
Flash
0#f| Link established
Packets are being transmitted or received
WAN port is not connected
hon| On
Flash
0#f| Link established
Packets are being tritted or received Phone portis not connected
LTE Signal
Strength
Indicator| 0e
0if| Link established
Packets are being tritted or received Phone portis not connected
REAR PANEL
The rear panel provides power and network connections to other devices.
Interface | Description |
---|---|
LAN 1-4 | Connects to user PC and/or other network devices |
WAN | Connects to Cable/xDSL Modem or ethernet |
Phone | Connects to an analogue telephone for voice over IP (Vo1P) |
USB 3.0 | USB 3.0 port |
Power | Power connection |
Mercku, Inc.
3600 Steeles Avenue East, Suite C108B, Markham, Ontario, L3R 9Z7, Canada
Mercku Inc. All rights reserved. www.mercku.com
Mercku Europe GmbH
Akazienstr. 3A, 10823 Berlin, Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>