HEAT EXPERIENCE INSOLES Smart Battery Heated User Manual

: June 5, 2024
: HEAT EXPERIENCE

Table of Contents

INSOLE OVERVIEW
BEFORE USE
QUICK TIPS
USE, MANUAL MODE
USE, APP MODE
USE, PAIRING MODE, AND HIBERNATION MODE
HEATING LEVELS
MAINTENANCE AND USE
CAUTION
Documents / Resources

SMART BATTERY HEATED INSOLES
USER MANUAL
THIS MANUAL CONTAINS IMPORTANT INFORMATION
KEEP FOR FUTURE USE.

INSOLE OVERVIEW

BEFORE USE

Congratulations on your new Heat Experience Heated Insoles. Before you start using them there are some things you should know.
The Heated Insoles must be fully charged before first use, or after a long period (2 months or more) of no use.
Charge the soles by connecting each sole to the USB cable, and connecting it to the power supply. Do not charge unattended.
When the red light is on, charging is ongoing. If the pink light is flashing, go to “Maintenance and use” for more information.
Charging takes about 3-4 hours, when charging is complete, the red light turns off, and a blue light turns on. Pair your insoles to the remote (3) before installing them in your shoes. For the best effect, turn on the heat before you get cold. We recommend that you test and get to know your heated insoles before heading out for greater adventures!

QUICK TIPS

If possible, turn on the insoles while indoors (in a warmer environment), this will help to protect the battery against getting cold, and prolong battery life.
Insoles can be tailored to your size, within the cutlines marked on the sole. Do not cut inside the inner marked line, this can result in damaging the heating system. Such damage is not covered by the warranty.
Remember to remove the shoes’ original insoles before inserting the Heat Experience Heated insoles.

USE, MANUAL MODE

The soles can be used in manual mode, or with the APP.

Manual mode:
While the sole is off, press the button to switch it to the highest temperature mode (III). If done correctly, the red light will turn on.
Press the button again to switch to medium temperature mode (II). In this mode, both the red and blue light will be on simultaneously.
Press the button again to switch to low-temperature mode (I). In this mode, only the blue light will be on.
Push once more, and the sole will turn off. (no light).
*Before first use, you need to either charge the insoles, or long-press the button (10 seconds, or until the light turns on) to start using the insoles.

USE, APP MODE

3.1) Before first use you need to activate the wireless signals from the insole. Press the button on the insole for 5 seconds until light turns on.
3.2) Turn on the Bluetooth on your phone
3.3) The insoles should now show up on your mobile phone list of Bluetooth devices. They are displayed as Smart Insole_L and Smart insole_R
Download and install the HeatX app for iPhone or Android. Find the app here: https://www.heatexperience.app or scan the QR code on the other page with your phone camera.
Open the app and follow the instructions to connect the insoles.

USE, PAIRING MODE, AND HIBERNATION MODE

To preserve battery life, you can turn on a hibernation mode on the insoles.
This feature shuts your insole completely off and will disconnect your insole from the app. It will also prevent accidental activation of the insole.
To activate hibernation mode:

Turn on insoles to blue or purple levels.
Long press the button on insole for 10+ seconds. The light will then turn off.

You can test if hibernation mode is activated by a short press of the button. If the insoles does not turn on, hibernation mode is activated.

To turn off hibernation mode and reactivate the insole:
A) Connect the insoles to the charger. When you disconnect the insoles, they will be reactivated.
OR:
B) Long press the button for 5+ seconds (until the light turns on).
TIPS: After recharging, hibernation mode will automatically turn off, so if you charge your insoles, but are not going to use them for a while, you should activate hibernation mode to preserve battery life.

HEATING LEVELS

Button	Temperature	Indicator light	Duration
I	45°C/113°F	Blue	6 hours
II	50°C/122°F	Purple	4 hours
III	55°C/131°F	Red	3 hours
ON/OFF		None

CERTIFICATIONS

MAINTENANCE AND USE

To clean your insoles, use a cloth and wipe them off. The insoles are not waterproof.

The insoles should be changed every 2 to 3 months if not in use, to prolong life. If the soles have been drained for battery, and the light flashes when charging, they need a reset. Go to this link for more help: faq. heat.eu For long-term storage, charge the insoles to about 50% and activate hibernation mode, (see pt. 4) for ideal battery preservation. For every 3-4 months discharge and recharge to 50%. Store in a cool and dry place, between 5°C/41°F – 20°C/68°F
You can charge the insoles with any 5v USB chargers, including powerbanks.
Do not charge unattended.
Do not excessively bend the insoles. This may cause damage to the heating elements. Be careful when installing the insoles in your shoes.
Only air dry the insoles. Do not place on radiators or other hot surfaces.
Users of heated insoles need to be aware of early sensations of a burn, including when an area of the foot becomes hot.
If you feel early warnings of a foot burn, immediately discontinue use of the insoles, and make sure your foot is not at risk of being burned.

CAUTION

Do not wash or soak insoles. The insoles contain a built-in circuit. Water or other fluids could damage or short circuit the electronics.
If the insoles get soaked, make sure they are dry before turning them on. Do NOT dry on high heat.
Wet insoles should be dried completely before turning on.
Keep out of high temperatures. The built-in polymer lithium battery may explode or be damaged if exposed to high temperatures or fire.
May explode if disposed of in fire.
Do not crush or disassemble.
Avoid high pressure (pressure should not exceed 250 kg).
All components should be recycled according to local laws and regulations.
Keep insoles away from children. Should not be used by users unable to feel changes in temperature.

Description	Value	Remark
Battery Voltage	3.7 V
Battery Capacity	2200 mAh	Polymer Li-ion battery
Charging Voltage Peak	4.2 ±0.05 V
Min. Discharging Voltage	3.0 V
Charging Mode	CC/CV

CONTACT
Do you have any more questions, feel free to reach out;
e-mail: contact@heatx.eu
Address:
Heatexp AS
Østre Rosten 102B
7075 Trondheim
NORWAY
Read more about Heat Experience, discover new products, and get inspired on
our webpage www.heatexperience.eu
Follow us on social media
facebook.com/theheatexperience
Instagram: Heat Experience
We hope you enjoy your product.
Kind regards, The Heat Experience Team.