HEAT EXPERIENCE APP Contolled Battery Heated Insoles User Manual
- June 5, 2024
- HEAT EXPERIENCE
Table of Contents
BATTERY HEATED INSOLES
USER MANUAL
Read this user manual before use.
This manual contains important instructions. Retain for future use.
INSOLE OVERVIEW
BEFORE USE
Congratulations on your new Heat Experience Heated Insoles. Before you start using them there are some things you should know.
The Heated Insoles must be fully charged before first use, or after a long period (2 months or more) of no use. Charge the soles by connecting each sole to the USB cable, and connecting it to the power supply. Do not charge unattended. When the red light is on, charging is ongoing. If the pink light is flashing, go to “Maintainance and use” for more information. Charging takes about 3-4 hours, When charging is complete, the red light turns off, and a blue light turns on. Pair your insoles to the remote (3) before installing them in your shoes. For the best effect, turn on the heat before you get cold. We recommend that you test and get to know your heated insoles before heading out for greater adventures!
QUICK TIPS
- If possible, turn on the insoles while indoors (in a warmer environment), this will help to protect the battery against getting cold and prolong the battery life.
- Insoles can be tailored to your size, within the cutlines marked on the sole. Do not cut inside the inner marked line, this can result in damaging the heating system. Such damage is not covered by the warranty.
- Remember to remove the shoes’ original insoles before inserting the Heat Experience Heated insoles.
USE, MANUAL MODE
The soles can be used both in manual mode or with the remote.
Manual mode:
While the sole is off, press the button to switch it to the highest
temperature mode (III). If done correctly, the red light will turn on. Press
the button again to switch to medium temperature mode (II). In this mode, both
the red and blue light will be on simultaneously. Press the button again to
switch to low-temperature mode (I). In this mode, only the blue light will be
on. Push once more, and the sole will turn off. (no light).
USE, REMOTE CONTROL MODE
3.1) For first-time use, or if the soles have been turned off manually, you
have to turn on the soles manually for the remote to work. (see 2)
3.2) Test that the insoles are responding to the remote before installing the
insole in shoes. If everything is working, the controller will flash when
pushed, and the insole will respond according to the buttons on the remote.
The remote range is 5m.
If you experience the unsteady connection between the remote and insole, it is
probably a low battery on the remote. It might help to hold the button for a
longer time (~2sec). If this doesn’t help, you probably need to change the
battery in the remote.
There are four buttons on the control;
| – Low temperature setting
– Medium temperature setting
– High temperature setting
– Turn the sole off
---|---
USE, PAIRING OF REMOTE
If you have trouble with the remote, you might have to pair or repair it to
the insoles:
Press and hold the button on the insoles, until the light flashes. – Soles are
now in pairing mode.
Push any button on the remote, the light on the sole will now stop blinking.
Your soles and the remote are now paired.
If the steps above are not working – check for the following:
Ensure the soles are fully charged.
Ensure the soles are turned on to activate the system.
Ensure that the remote has a battery (If the remote works, a red light flashes
from the top when any button on the remote is pressed).
If all of the above are working, retry the pairing process.
HEATING LEVELS
| Button | Temperature | Indicator light | Duration |
|---|---|---|---|
| I | 45°C/113°F | Blue | 7 hours |
| II | 50°C/122°F | Purple | 5 hours |
| III | 55°C/131°F | Red | 3 hours |
| ON/OFF | None | – |
CERTIFICATIONS
MAINTENANCE AND USE
To clean your insoles, use a cloth and wipe them off. The insoles are not waterproof. The insoles should be changed every 2 to 3 months if not in use, to prolong life. If the soles have been drained for battery, and the light flashes when charging, they need a reset. Go to this link for more help: faq.heatx.eu For long-term storage, charge the insoles to about 50%, and for every 3-4 months discharge and recharge to 50%. Store in a cool and dry place, between 5°C/41°F to 20°C/68°F
You can charge the insoles with any 5v USB chargers, including power banks.
Do not charge unattended.
Do not excessively bend the insoles. This may cause damage to the heating
elements.
Be careful when installing the insoles in your shoes.
Only air dry the insoles. Do not place on radiators or other hot surfaces.
Users of heated insoles need to be aware of early sensations of a burn,
including when an area of the foot becomes hot.
If you feel early warnings of a foot burn, immediately discontinue use of the
insoles, and make sure your foot is not at risk of being burned.
CAUTION
Do not wash or soak insoles. The insoles contain a built-in circuit. Water or
other fluids could damage or short circuit the electronics.
If the insoles get soaked, make sure they are dry before turning them on. DO
not dry on high heat. Wet insoles should be dried completely before turning
on.
Keep out of high temperatures. The built-in polymer lithium battery may
explode or be damaged if exposed to high temperatures or fire.
May explode if disposed of in fire.
Do not crush or disassemble.
Avoid high pressure (pressure should not exceed 250 kg).
All components should be recycled according to local laws and regulations.
Keep insoles away from children. Should not be used by users unable to feel
changes in temperature.
Inspect the appliance, including the charger and cables for signs of damage.
If such signs are present, please stop using the product, and contact Heat
Experience for further instructions.
| Description | Value | Remark |
|---|---|---|
| Battery Voltage | 3.7 V | |
| Battery Capacity | 2200 mAh | Polymer Li-ion battery |
| Charging Voltage Peak | 4.2 ±0.05 V | |
| Min. Discharging Voltage | 2.7 V | |
| Charging Mode | CC/CV | |
| Battery’s Maximum Charging Current (Ordinary Battery) | 1500mA (1. OCSA) |
0°C-45°C
Battery’s Maximum Discharging Current (Ordinary Battery)| 1500mA (1. OCSA)|
-20°C-60°C
Battery’s Internal Resistance| <10mC2| 1kHz ±0.1kHz
Remote Control’s Transmitting Frequency| 433MHZ| ISM channel
CONTACT
Do you have any more questions, feel free to reach out;
e-mail: [email protected]
Address:
Heatexp AS
Østre Rosten 102B
7075 Trondheim
NORWAY
Read more about Heat Experience, discover new products, and get inspired on
our webpage www.heatexperience.eu
Follow us on social media
facebook.com/theheatexperience
Instagram: Heat Experience
We hope you enjoy your product.
Kind regards, The Heat Experience Team.
References
- Customer service - Heat Experience
- Battery heated clothing delivers active heat when you need it. With rechargeable battery technology it is easy to choose between different heating levels.
- Battery heated clothing delivers active heat when you need it.