eSunfi SHFiM2-ProS Slave Mesh Router Interface Button View Installation Guide

Quick Installation Guide

Master with two slave mesh router wifi coverage

Master with one slave mesh router wifi coverage

Master mesh with one Slave mesh could cover more than 3000 sqft house;Master mesh with two Slave mesh could cover more than 5000 sqft house.
Enjoy eSunFi mesh excellent wifi coverage and rocket high throughput

SHFiM2-Pro Mesh Router Indicator Status

You can understand mesh status by indicator status.
SHFiM2-ProM
Master Mesh Router

SHFiM2-ProS
Slave Mesh Router

SHFiM2-ProM

Master Mesh Router Interface/Button View

blink to red, hold on until the light is off.
SHFiM will turn off and restart by the factory setting.

SHFiM2-ProS
Slave Mesh Router Interface/Button View

SHFiM2 ProS| To avoid Mesh network issues that are created by cable connection, we canceled the Wan port on ProS
---|---
Lan Ethernet Port| LAN connection for your computer/device
DC Power Jack| DC 12V 1.5A
Reset Button| Press the reset button for 8  seconds and the LED light will blink to red, hold on until the light is off. SHFiM will turn off and restart by the factory setting.

ProM Connect DSL/GPON Modem
Connect your DSL/GPON modem Lan port to the Wan port of
SHFiM2-ProM by cable.

Note:
If you want to connect your SHFiM2-ProM router to an existing gateway, we recommend that you turn off you’re existed gateway’s Wi-Fi, to avoid wifi band interference

Note:
The only operation about ProS is Power On, No need to do any other setting on ProS, very easy and convenient.

After the ProM setting is finished, please set ProS to a suitable position and power on, we ensure the ProS light is Blue, which means the Mesh network succeeds and the signal is good. check Mesh status, if the Topology shows as below, it means Mesh network creat successfully and works fine. Orange router means ProM, and Blue router means ProS.

Open Web Browser to Access the Router
When your computer connects to the network (either with Wi-Fi or with an Ethernet cable), you can use a web browser to access the router to view or change its settings. The first time you access the router, a Quick start guide displays.

Access your router with a Web Browser IP Address:192.168.8.1 Password:12345678

When you login Mesh-Web, we have PPPoE and DHCP mode

At PPPoE mode
You could dial-up access on Mesh instead of Modem (username and password provided by your internet service supplier)

At DHCP mode
Your modem already does dial-up access work, just connecting the Mesh WAN port with the Modem LAN port by cable is OK.

After PPPoE and DHCP Setting
Let us config WiFi Setting

When you select WiFi setting, you can set up WIFI SSID and Password for 2.4G and 5G both, we suggest setting the same password for 2.4G and 5G WiFi.

Note:
You could enjoy the WiFi band combination function also, which could combine 2.4G and 5G WiFi together, mesh router will select the best signal band automatically for you, no need to switch to other bands by yourself.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>