SEGON JS-EST10B 3 Inch MINI Satellite Loudspeaker Instruction Manual
- June 12, 2024
- SEGON
Table of Contents
SEGON JS-EST10B 3 Inch MINI Satellite Loudspeaker Instruction Manual
INTRODUCTION
Thank You For Purchasing the SEGON® Product
Segon® Speakers features an outstanding combination of performance and value
in each of our products. To ensure you get the most out of your new
loudspeakers please take a moment to read this manual before you get started.
A Few Words About Your New Outdoor Wall Mount Speaker
Segon® Outdoor loudspeakers are designed to accurately reproduce high fidelity
music in an outdoor environment. Ideally designed for background music and
business place integration.
High freuency response as required for outdoor scenerios with great bass response Segon® Outdoor Loudspeakers are IP64 waterproofed and are built to withstand the most rigorous weather and climate conditions.
Every exposed bolt is made of stainless steel is ensure endurance and fuctonality. The cabinet is made of a high-impact ABS poly-mer painted with UV protecton industrial quality paint.
The primary components include a paper cones made of various materials and around the rubber surround. Makes the JS-EST10 mini&light, high sensitivity and better sound.
PRODUCT DETAIL
AUDIO CONNECTIONS
Figure 1.
Figure 2.
Be careful not to cross wires when installing your speakers. Wiring should
always be negative to negative and positive to positive. (Figure 2. shows
speaker c. incorrectly wired)
MOUNTING THE SPEAKERS
Installation of your Segon® Speaker is designed to be simple and intuati e, it is largely advised to consult a professional installer. Make sure the materials on which you plan to mount the speakers can support the weight of the speakers.
Hardware is provided for attaching the brackets directly to a solid wood beam
and also to sturdy drywall that is atleast 5/8″ thick.
Never a ach the speakers to a wall that might contain electrical wiring or
plumbing.
IF YOU ARE UNSURE ABOUT ANY OF THESE INSTRUCTIONS, PLEASE CONTACT A PROFESSIONAL CUSTOM AUDIO INSTALLER.
Although Segon® Speaker are waterproof and can be placed directly in the elements, mounting the speakers in such away that they will not absorb rain or sun directly will improve the speaker’s longevity. Placing the speaker in a corner will also help improve bass performance.
Always mount the speakers so that they are aimed slightly downward in order to not collect rain water. Also, make sure to follow the “drip loop” instructons/example diagram.
Segon® Speaker can be mounted vertically or horizontally and then aimed as needed to deliver the best sound performance for your area. In most cases, you will achieve the best stereo sound and imaging if you mount both speakers along the same wall between 3-6 meters apart.
INSTALLATION
STEP : 1 Fix the bracket to the wall.
STEP: 2 Connect the speaker wire.
STEP : 3 A ach phoenix connector to the speaker.
STEP : 4 Attach the speaker to the bracket.
STEP: 5 ① The speaker cable can be removable and fixed through the hole.
② Done.
PROTECTING YOUR OUTDOOR SPEAKER With a “DRIP LOOP”
Segon® recommends using a “drip loop” when installing your speaker cable to help minimize the direct flow of water onto the speaker. This will assist in reducing any potential long-term oxidation or water penetration issues by providing a low point for water to escape prior to reaching the speaker.
The below examples illustrate how (and how not) to utlize a drip
loop.
Underpower VS. Overpower
- Most speaker damage is caused by amplifiers with too little pow r (wattage ).
- An overdriven amplifier clips the waveforms and leads to speaker distortion.
- Clipping is usually audible and it may vary from a harsh sound to a fuzzy or unclear sound.
- If you hear the clipping at high volume levels, turn down the volume until th distortion i gone.
- Damage caused by operating th speakers at distorted volume levels is not covered by the warranty.
Volume Control
- The volume is controlled by your amplifier.
PRODUCT SPECIFICATIONS
Woofer : 3 inch*1 ( Paper cone, Foam cotton Surround
Impedance(AC) : 8Ω
Sensitiv ty( Output SPL) : 84±3dB
Freq. Range : 228 Hz-20kHz±3dB
Power Handling RMS (Rated Input power) : 228 Hz-20kHz±3dB
Housing Material : 15W program, 10W ( IEEE 219 )
Dimension(WHD) : ABS
Net Weight : 90.597107.5mm
Attachmen : Bracket, Screw
Multi Dev ce Connection : YES
IP Rating: IP64