fiodio F-510 Waterproof Bluetooth Speaker Instruction Manual

F-510 Waterproof Bluetooth Speaker
Instruction Manual

Product Specifications

• Bluetooth Version: V5.0
• Output Power: 5W*2 (RMS)
• Driver Size: 3 inches 40 10W*2 -5/N
• Ratio: 70dB ‘,Size: 298102168.8mm
• Water Resistant Level: IPXS

Pack Contents:

1. Wireless Speaker x 1
2. Instruction Manual x 1
3. USB Charging Cable x 1

Charging the Speaker
Before using the speaker for the first time, charge it for at least two hours.

1. Plug the USB cable into the port on the speaker, and plug the other end into the USB port on a computer / AC USB power adaptor.
2. Red LED will turn on to indicate that the unit is charging.
3. Red LED will turn off when fully charged.

Power ON/OFF

1. Long press ‘ ” to turn on the Bluetooth speaker, and the machine prompts’ POWER ON
2. The prompt sounds and enters the Bluetooth mode
3. Long press ‘ ” again to turn off the Bluetooth speaker. The machine prompts “POWER OFF”

Pairing the Speaker

1. Place the speaker near the Bluetooth-enabled device.
2. Long press the Power button to start the Bluetooth speaker, speaker prompt sounds, the speaker is now in pairing mode.
3. Follow the instructions of your device to search for the speaker.
4. The speaker is called “FIODIO F-510” , and enter the PIN ‘0000’ if needed.
5. When the connection is successful, there will be a voice prompt
6. Once the speaker is on, it will try to paid with the last connected device, if the connection fails speaker enters pairing mode.
7. To re-enter Bluetooth pairing mode if already connected to a device, press and hold the play/pause button for three seconds

Bluetooth operating instructions :

1. After the Bluetooth connection is successful, press ” ” to play music, press again to pause music
2. Press the “ ” to decrease volume, and long press for the previous song.
3. Press the “ ” to increase volume, and long press for the next song.

AUX operating instructions:

1.  Power ON, insert the 3.5mm audio cable into the AUX port and automatically switch to AUX. You can also press the ” M ” to switch to AUX mode to play music, and voice prompts AUX status.
2. Press the “ ” to decrease volume.
3. Press the “ ‘ to increase volume.
4. Press the ” ‘ to play/pause music.

USB operating instructions:

1. Turn on the speaker, insert the USB flash drive into the USB port, and automatically switch to USB. You can also press the ” M ” to switch to USB mode to play music and voice prompt USB status
2. Press the “ ” to decrease volume, and long press for the previous song.
3. Press the “ ” to increase volume, and long press for the next song.
4. Press the “ to play/pause music.

fiodio@cesz.com

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>