ENSTO HJT11.2402C Heat Shrink Transition Joint Instruction Manual
- June 3, 2024
- ENSTO
Table of Contents
HJT11.2402C Heat Shrink Transition Joint
Instruction Manual
HJT11.2402C Heat Shrink Transition Joint
HJT11.2402C
APYAKMM/PYLKVJ – AHXCMK
U o/U(Um) kV| 
mm²
---|---
12/20 (24) kV| 50-95
LEGAL NOTICE
- The product must be installed only by a competent person with sufficient training in installation practices and with sufficient knowledge of good safety and installation practices in respect of electrical equipment. If local legislation contains provisions in respect of such training or sufficient knowledge in respect of the installation of electrical equipment such provisions shall be fulfilled by the said person.
- Ensto accepts no liability concerning claims resulting from misuse, incorrect installation, or ignored national safety regulations or other national provisions.
- WARNING: Failure to follow the installation instructions may result in damage to the product and serious or fatal injury.
| CPEEPL68-19| 750 mm| 3| 
| SSETA46| 700 mm| 3
---|---|---|---|---|---|---|---
CPEEL50-16| 150 mm| 3| SSITA42| 500 mm| 6
STT38| 200 mm| 3| STCTA49.5| 5000 mm| 3
SISCT47| 380 mm| 3| STCTA49.1| 1000 mm| 1
SIST16| 420 mm| 3| SF3| | 3
SBO3.5| | 1| PEE92.10| | 2
CA95SB2| | 3| PEE64.1/600| | 3
SSCTA85.6| 650 mm| 3| PEE64/150| | 2
SSCTA85.1| 100 mm| 6| PEE39/1500| | 2
SSM83.3| 360 mm| 2| CT149| | 9
PA22.500| 500 mm| 3| PA23| | 3
| PA21| | 2| | PEE225W| | 1
PEM-HJT11_2402C| | 1| | | |
| 
---|---
| 
| 
| 
| 
| 
| 
PEM-HJT11_2402C
2021-11-25
Revision C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>