Ningbo Fengsheng Electronics SY-AP4 WIFI Smart Socket User Manual
- June 5, 2024
- Ningbo Fengsheng Electronics
Table of Contents
SY-AP4 WIFI Smart Socket
Ningbo Fengsheng Electronics Co., LTD
WIFI smart socket manual
1 Product description
WIFI smart socket is a socket that can connect to the Internet through WIFI
wireless network and realize network control of electrical power supply. In
any place where there is a network, users can achieve power on and off control
and status display through the smart phone client, while the client also
supports the control of multiple sockets. WIFI smart socket adopts the patent
technology of Smart Config to access the network, which is easy to configure
and supports multiple timing tasks at the same time. Enjoy the wireless
enjoyment of WIFI smart socket by controlling water dispensers, electric
kettles, fans, lights and rice cookers locally or remotely.
2Instructions for use
1)Enter the network configuration mode: after opening the socket power for 3
seconds, press the switch for another 6 seconds, and the indicator light will
enter the fast flashing state, and then release the switch until the APP
displays the successful configuration. 2) When the socket is connected to the
network through the customer service side of the phone, if the backlight with
the key on is in a slow flash state, it means that the socket is connecting to
the router, and the backlight is always on after successful connection.
3)After the network access is successfully configured, the user can control
through the mobile phone client. If the backlight is red at the on-off key,
the socket is on; if there is no backlight at the on-off key, the socket is
off. 4)The user can also control the on/off state of the socket by turning the
key on. If the user presses the on/off key and the back light of the on/off
key is red, the socket is in the on state; if the back light of the on/off
key, the socket is in the off state. 5)After the socket is successfully
connected to the network, there is no need to reconfigure the connection after
power failure. The socket will actively join the wireless router. 6)Please
refer to the “Help” in the client software for the specific access method and
configuration.
3 Product parameters
Model
SY-AP4, SY-AP4C
Current:
Max. 15A
Voltage:
125 V / 60 Hz
Max power
1875W
Frequency Band:
2400-2483.5MHz
Static power loss:
Working environment
Temperature: Humidity:
< 0.8W 0~40 10% to 95%
Wireless standard:
802.11b /g/n
4 Product features
1)Support WIFI wireless network; 2)Support smart Config network access patent
technology, easy and convenient network access; 3)Real-time state feedback is
supported, and the working state of electrical appliances can be fed back to
the client in real time; 4)Support the setting of timing tasks; 5) The mobile
phone client can control up to 100 smart sockets; 6) Simple installation, plug
and play, simple and safe operation; 7) Support local or remote wireless
control of electric appliances such as water dispensers, electric kettles,
fans, lights and rice cookers.
5Matters needing attention
- Keep away from moisture and moisture, only in dry places (not used in
bathrooms, etc.) 2) Please use it in a safe environment to ensure the safety
of electricity. (Working power shall not exceed 1875W, current shall not
exceed 15A)
Note: All pictures in this manual are for reference only. The details are in kind.
6The FCC warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Caution: Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver. –Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. –Consult the dealer or an experienced radio/TV
technician for help.
To satisfy FCC RF exposure requirements, a separation distance of 20cm or
moreshould be maintained between the antenna of this device and persons during
device operation. To ensure compliance, operations at closer than this
distance is not recommended