7Pandas H0533538 Poleis 15 9-10″ Wide 2-Light Chrome Vanity Light Instruction Manual

7Pandas H0533538 Poleis 15 9-10″ Wide 2-Light Chrome Vanity Light

Overview

INSTALLATION MANUAL

WALL LAMP
Please read carefully and keep for future reference!

NOTES ON SAFETY

• Do not hang or fasten anything on the product, especially no
• Keep children away from the product.

NOT touch the product or operate it further. Disconnect the product from the power supply by an external switch or by the fuse. To danger from electric shock, burning or fire

• Visible damages appear.
• The product does not work properly (e.g. flickering)
• Smoke, steam, or crackling sounds appear.
• Smell of burning is recognizable

Only operate the product with approval from licensed electrician

USE AS DIRECTED

• Only be used with a voltage of 120V -60Hz
• Not be exposed to strong mechanical loads or to strong
• if the product is dirty or has been moistened through storage
• If these points named above are not adhered to, a short circuit or electrical shock may occur!

TECHNICAL DATA

COLOR:

|

Chrome

|

Chrome

|

Chrome

---|---|---|---

voltage:

|

120V-60Hz

Safety class:| I
Bulb:| E26 1Max. 60W| E26 2Max. 60W| E26 3Max. 60W
Dimensions:| 6.17.39.1in| 15.97.39.1in| 23.67.3*9.1in
Weight:| 1.85lb| 4.41lb| 7.05lb

PLACEMENT

ceiling. Choose a place for the product where it is prevented from falling down, e.g. by accidently knocking it down! Change the light source always before it reaches its lifespan, to avoid personal injuries, or damages of the fixture or other objects

OPERATION

Connect the lamp cord of the product with a socket of the public power supply (mains).Use the switch to turn the product on and off. Never let children play unsupervised with electric products! electric energy correctly

WHAT ELSE HAS TO BE CONSIDERED

Disconnect the product from power, before you…

• Clean or maintain the product.
• Do any works on the product or its components (electric expert.)

Parts List

Instruction

Step 1

Attaching the cross bar to The Outlet box
Screw the mounting screws (DD) into the cross bar (AA). Mount the cross bar (AA) to the outlet box using the two outlet box screws (CC).

Step 2

Wrap the ground wire from the xture around the ground screw (BB) on the cross bar (AA). Connect the ground wire from the xture to the ground wire from the outlet box. Connect the white wire from the xture to the white wire (neutral wire) from the outlet box. Connect the black wire from the xture to the black wire (live wire) from the outlet box. Cover the three connections using the three wire connectors (EE). Wrap the three wire connections with electrical tape for a more secure connection. Position the wires back inside the outlet box.

Step 3

Securing the xture to the outle box
Place the wall plate (A) over the outlet box. Align the mounting screws (DD) to protrude through th appropriate holes on the wall plate (A). Screw the lock nuts (B) onto the mounting screws (DD

Step 4

Securing the shades
Place the shades (D) over the sockets (C). Screw the socket rings (E) on the sockets (C).

Step 5

Installing the bulbs

Screw the bulbs (not included) into the sockets (C).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>