7PANDAS H0594510 BRUCE Outdoor Exterior Wall Sconce Glass Matt Black Instruction Manual
- June 13, 2024
- 7Pandas
Table of Contents
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Model: H0594510
H0594510 BRUCE Outdoor Exterior Wall Sconce Glass Matt Black
-
Attach the mounting plate to the outlet box by using two mounting screws.
-
Pull out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as follow:
–Connect the hot wire(usually black insulation)from the fixture to the black wire from the power source.
–Connect the neutral wire(usually white insulation)from the fixture to the white wire from the power source.
–Attach the fixture grounding wire(usually green insulation or bare wire)to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put the wires back into the outlet box. -
Attach the back plate to the mounting plate by inserting the screws, then secure it with two nuts.
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets with the wall surface to prevent water from seeping into the outlet box.
Turn on the power at fuse or circuit box.
Documents / Resources
|
7PANDAS H0594510 BRUCE Outdoor Exterior Wall Sconce Glass Matt
Black
[pdf] Instruction Manual
H0594510 BRUCE Outdoor Exterior Wall Sconce Glass Matt Black, H0594510, BRUCE
Outdoor Exterior Wall Sconce Glass Matt Black, Exterior Wall Sconce Glass Matt
Black, Wall Sconce Glass Matt Black, Glass Matt Black, Matt Black, Black
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>