rapoo 7200M Silent Multi-Mode Wireless Mouse User Guide
- June 5, 2024
- rapoo
Table of Contents
rapoo 7200M Silent Multi-Mode Wireless Mouse User Guide
Bluetooth mode
A. Pair your first device
- Turn on the mouse.
- Keep pressing the Bluetooth button at least 3 seconds to pair. The status LED flashes green slowly. The mouse is discoverable for 2 minutes.
- Complete Bluetooth pairing on your device. When the mouse and your device are paired, the light turns off.
B. Pair your second device
- Press the Bluetooth button to switch to another channel. Keep pressing the Bluetooth button at least 3 seconds to pair. The status LED flashes blue slowly. The mouse is discoverable for 2 minutes.
- Complete Bluetooth pairing on your device.
Switch among paired devices
Press Bluetooth button to switch among up to 3 paired devices (connect up to 2 devices via Bluetooth and 1 via a 2.4 GHz receiver).
Status LED
When you pick up the mouse
If the light turns stable green for 6 seconds, the Bluetooth device 1 is
paired. If the light turns stable blue for 6 seconds, the Bluetooth device 2
is paired. If the light is off, the 2.4 GHz device is paired.
Switching among paired devices
When you switch to the 2.4 GHz device, status LED turns off. When you switch
to Bluetooth device 1 or 2, green or blue light rapidly flashes, respectively.
Low battery
Green light rapidly flashes twice every two seconds when you use the mouse.
Package contents
System requirements
Windows® XP / Vista / 7 / 8/ 10 or later, USB port
Warranty
The device is provided with two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
Declaration of Conformity
We, the manufacturer
Shenzhen Rapoo Technology Co., Ltd.
Fax: +86-0755-2858 8555
Declare that the product
Product Name ：Multi-mode Wireless Mouse
Model No ：6610M, 7200M, M300, M500, MT350
Complies with the following norms of :
EN 300 440 V2.1.1(2017-03)
EN 300328 V2.1.1(2016-11)
EN 301 489-1 V2.2.0(2017-03)
EN 301 489-3 V2.1.1(2017-03)
EN 301 489-17 V3.2.0(2017-03)
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
The product is in compliance with the essential requirements of Radio
Equipment Directive 2014/53/EU,and the RoHS Directive 2011/65/EU.
Manufacturer/Authorised representative
Kai Guo, Manager
R&D Department Date of Issue: Mar. 30, 2018
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
IC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,including interference that may
cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd
Made in china
Read More About This Manual & Download PDF: