wiscent WTB-791 Portable CD Boombox Instruction Manual

wiscent WTB-791 Portable CD Boombox Instruction

Warnings and Precautions

This symbol, located on the back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage within the Product’s encl= that may constitute a risk of electric shock to persons. This symbol, located on the back or bottom of the unit, is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature Accomp ying the appliance. This product ul:ili:r.es a Class I laser to read Compact Discs. Thi laser Compact D11c Player Is equipped with wet niche to avoid exposure when the CD door ii opened ud the CD player’• lid ii damaged. Invisible laser radiation i1 is present when the CD player is open and the 1ytem’1 Interlock bu failed or h• been damaged. It is very important that you avoid direct exposure to the wer beam at an Ume• Please do not attempt to damage or byp•• the wety switch:he•

CAUTION : TO PREVENT ELECTRIC SHOCK, ENSURE TO INSERT 2 PIN PLUG CORRECTLY INTO TIIB MATCHING SOCKET OR ADAPTOR.

To reduce the risk of electtic shock, do not remove the cover(or back). There are no user-serviceable parts inside. Please refer any servicing to qualified service personnel.

WARNING : Changes or modifications to this unit not approved by the puty responsible for compliance could void the user’s authority to operate the equipment.
WARNING :To put a fire or shock awards,do not export this unit to rain or moisture.
CAUTION: Danger of explosion ifbattay is incorrectly replaced, Replace only with the same or equivalem type.

Do not mix old and new batteries. DO not mix alkalim,,standard(clllbon- zinc),orrechargeable (ni-cad,Di-mh,etc) batteries.
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device. pursuant to part IS of the FCC Rules. These Bmtt are designed to provide reasonable protection against harmful interference In a residential Installation. ‘I’ll equipment generates, IIHll, and can radio frequency energy and,H not Installed and used in accordance with the in1tructlons,may came harmful interference to radio communications. However, there i no guarantee that interference will not occur in a particular installation. H this equipment does cause harmful interference to radio or television reception, which cu be determined by turning the equipment off and on,the user la encouraged to try to correct the interference by one or more of the following measure1:

• Re-position or relocate the receiving antmma.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different form that to which the rece iver is connected.
• Consult the dealer or an experienced radio tv technician for help.

Powering the Unit

AC Power
Plug the detachable AC cord into a standard AC outlet (100-240V- 50/60Hz)

Battery Power
Requires 4 C batteries, not included.

Tuning the FM Radio

• Step 1: Adjust the MODE Button to FM mode.
  • • Extend the FM antenna to improve FM radio reception.
• Step 2 :Short pressPREV next to jump to the previous or next available station.

Playing a CD

• Step 1 : Open the CD door, and place a CD or CD-R/RW INTO THE PLAYER.
• Step 2 : Adjust the MODE to CD mode. then play automatically.
• Step 3: Press the Play/Pause Button to pause.

Using the Auxiliary Input

• Step 1: Connect a mini-phone 3.5mm. Cable to the Auxiliary Input on the unit and the audio output on an MP3 player.
• Step 2 : Adjust the MODE to AUX IN mode.
  • • Audio played through the connected MP3 player will now be heard through the unit.

Bluetooth

• Step 1: Press EQ/MODE on the unit to select Bluetooth mode to BT.
• Step 2: Tum Bluetooth on on your mobile phone and search for WTB-791.
• Step 3 : You will hear a small sound indicating that the pairing has been successful.
• Step 4 : You can now play music from your mobile phone via the unit

Locations of Controls

Control Definitions

1. OPEN/CLOSE

2. POWER
   Standby mode, short press for tum on the unit, and short press again for unit turning off.The unit default at FM when first tum on

3. PREV/TUN-/NEXT/TUN+
   In FM mode: One short press , The frequency move towards or backward. In CD/USB Mode:One short press is for Pre or next program;Long press is for Fast backwards and towards In BT mode: Short press the up or down once to switch the sound. In AUX Mode:This key no function ;

4. STOP/REP/MEM
   In FM mode: a one-time short press is for memorized frequency, maximum can memorize 20 frequencies. In CD/USB Mode:in play mode, one time press for one music repeat, press again for all program repeat , one-time short press delete this function and long-press seconds stop play.In AUX/BT mode:The key has no function.

5. VOLUME
   Turn right to up the Volume till 32 level, turn left to lower the Volume.

6. AUX
   Use the Auxiliary input to connect an external audio source (MP3 player) to the unit.

7. USB
   Press the Mode key on the unit control to select USB mode and plug in a USB.

8. EQ/MODE
   Long press EQ key for FLAT/CLASS/JAZZ/ROCK/POP mutual change In working mode : short press for Radio/CD/USB/AUX/BT mutual change

9. PLAY/PAUSE/SCAN.

   • In FM mode: long press for 2 seconds for auto scan FM frequency .
   • In CD/USB/BT mode :first short press for Pause ,short press again for play ;
   • In AUX mode :The key no function ;

10. PHONES

11. Tuning Dial In FM mode, turn left to progressive increase the radio frequency and turn right to progressive decrease the radio frequency by 1 00KHz

12. .AC Power Input Use the AC Power input to connect the unit to an AC power source.ource.

Technical Specifications:

Input voltage : AC 100-240V~ 50/60Hz
Output power : 2 x 2W
FM Radio: 87.5-l0SMHz
Machine size: L260W200Hl28mm
Battery: 4 x “C” size batteries (not included)

Warranty:

Lifetime support. 36-Month Warranty Policy and Friendly Customer Service Amazon Message System (Contact Seller) or Email us: wstsales@163.com

Dear customer:
If you are caught in some problems when using our products, welcome to contact us at any time. we will assign technical personnel to solve your problems immediately after receiving the feedback idea of users.Friendly Customer Service Amazon Message System (Contact Seller) or Email us: wstsa1es@163.com

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>