temi KIX-M Watch Smart Band User Manual
- June 27, 2024
- TEMI
Table of Contents
temi KIX-M Watch Smart Band
Product Information
Specifications:
- Screen Size: TFT 1.3 inches
- Battery Capacity: 220 mAh
- Protection Level: IP68
- Manufacturer: Shenzhen Minrek Electronic Ltd.
- Manufactured in China
Product Usage Instructions
Device Elements:
- Screen
- Charging terminal
- Heart rate sensor
- Power button
Power On/Off:
To turn on the device, press the power button for 5 seconds or connect it to the charger. To turn off the device, press the power button for 5 seconds.
Installation of APP and Pairing:
The product is compatible with smartphones running Android 4.4 or iOS 8.0 and newer, with Bluetooth from the specified version. The companion app can be found on the manufacturer’s website, Google Play Store, and App Store.
Ensure your phone is connected to the internet during pairing. Activate Bluetooth on your phone and make it discoverable to nearby Bluetooth devices. Follow the in-app instructions for pairing your device with the smartphone.
Basic Features:
Main Screen Display: Time, date, steps, distance, calories burned, battery level, Bluetooth connection status.
Heart Rate Measurement:
For accurate measurement results, ensure you are warm. Place the device correctly on your wrist and access the heart rate menu to measure your heart rate. Note that heart rate, blood pressure, and blood oxygen data are for reference only and not for medical use.
Connecting Bluetooth Earphones:
To pair Bluetooth earphones, navigate to the settings and select “Watch > Earphone > New Device.” Search for your earphones or speakers and select them. Connect the device to a computer via the power cable to upload music.
Frequently Asked Questions
Q: How do I charge the device?
A: Use the provided charging terminal to connect the device for charging or plug it into a power source.
Q: Can I swim with the device?
A: The device has an IP68 rating, making it suitable for water splashes and brief immersion but not recommended for swimming.
Extended user guide available on www.bemi-electronics.com
Product Description
- Screen
- Charging terminal
- Heart rate sensor
- Power button
Smart band mode: KIX-M, in manual called “device”
It is mandatory to read this manual before start to using the device.
To turn on the device, press the power button for 5 seconds or connect to the
charger. To turn off the device, press the power button for 5 seconds.
Maintaining Equipment
Clean the device regularly, especially part that close to the skin, to keep it
dry. Adjust the tightness of the device belt to ensure air circulation. On
wrist, where wearing device should not use excessive skin care products. If
you have skin allergy or discomfort, please stop wearing device. Do not wear
the device during a hot bath or shower. Do not expose the device to cleaning
agents, caustic agents or other chemicals. Do not expose the device to high
(over + 50 ° C), low (below -10 ° C) temperatures or heat due to, for example,
sunlight or other heat source. It may damage the device. The product is not
suitable for children and infants.
Note: IP68 means that this device is resistant to a single immersion in standing water to a depth of 1.1 meters for up to 1 hour. Exposing the device to tougher conditions can damage it. This device is not intended for water sports, diving and swimming.
Charging
Before start using the device, please make sure the battery is charged. For charging, please use the provided magnet charging cable. The recommended power adaptor current is 5V, 1A. It takes about 2 hours to fully charge device, please follow the steps below to the charge.
- Place the connector of the charging cable under the device so that its pins contact the metal points in the device charging terminal.
- Magnetic connector will place itself in right position
- Connect the charging cable to the power source using the USB connector.
- Charging animation will display on the device screen
Note: if the device discharged completely then animation of charging may appear after a few minutes.
Downloading APP for Phone and pair with Device
Note: mobile phone must support Android 4.4 or IOs 8.0 or above and Bluetooth
4.0 or above. Some application functions may be invisible in older OS versions
of the smartphone. Scan QT code with mobile phone to download and install APP
or search, download and install “H Band” APP from App store or Google Play
Store on your smartphone.
While pairing, the phone should be connected to the Internet. Make sure that
the smartphone is set to “Visible to all nearby Bluetooth devices” when
pairing. Pairing the device with the phone via APP:
- Activate Bluetooth on your phone
- Open the application and click “Click to connect device”
- Click on the name of your device in the device list. If the connection is successful, app will ask to synchronize data from the device.
Bluetooth connection between phone and device may disconnect in some circumstances. The most common of them are: phone and device are too far from each other(more than 10 meters), there are some walls between them, there are some magnetic or radio interference in environment, user close the APP working in background, user click on the one-button cleaning of the phone.
Introduction on the Function of Device
The main menu interface is launched by pressing the power button. There are
also shortcuts to functions by scrolling left and right, and up and down on
the home screen. Click the screen or icon of function you choose to use it or
open function menu. When you are in function slide left to back to previous
screen. When the device and APP are first time connected and paired, the time
and date will be synchronized with the mobile phone.
Introduction to Function available for Device Interface
NOTE: During test of Heart rate, Blood pressure, tested person should be kept
still. Any action during the test like eating, speaking, etc. will affect the
accuracy of the measurement. Factors affecting the lowering of the accuracy of
measurement include: tattoos, scars, moisture, thickness, strong pigment and
hair of the skin in the place of measurement. Keep the heart rate sensor clean
and close to the skin. If you wear it too loosely, the sensor’s light will be
exposed, resulting in inaccurate measurement values. Do not look directly at
the sensor green light. During test, please keep your body inactive and sit
still, otherwise the time of test will be longer or data will be inaccurate.
If there is a big difference in the measured data, please take a break and
test again. Longtime measurement may lead to overheating of the device. In
case of overheating, please remove device until it cools down. The cold
weather will affect your measurement results, please measure while keeping
warm. Place the device on the wrist correctly and enter the heart rate menu to
measure the heart rate. The data of Heart rate, blood pressure and blood
oxygen measurement are for reference only and cannot be used as a basis for
medical-related aspects.
Main screen (clock face)
A-hour, B-minute, C-date, D-steps, E-distance, F- calories burned, G- battery
level, H-Bluetooth connection:
To change clock face, press and hold on the screen, then slides down or up to change clock face.
2. Step – Steps, calories and distance will count automatically after start of using the device. The data is displayed every specific number of steps, their amount depends on distance already walked and device software version (between 1-25 steps). These data are approximate due to individual differences between users. In order for the steps to be recorded, the hands should move in a natural manner when walking, for example walking with a stroller may not be read as a step. More data and settings is available in the APP.
Sleep – Sleep monitoring automatically recording your sleep started any time between 18:00 to 08:00 the next day. Shortened data is available in the device. More data is available in the APP. In APP can also set up sleeping time goal. So this data can be recorder firs need to turn on this option in APP Settings: Mine>My device>Switch settings>Scientific sleep
Sport
- Enter sport mode. Then find the right kind of activity by slides down and selecting by click the screen to enter.
- Sliding the screen to down will jump to other data interfaces and interfaces where you can Pause or End recording.
- When the activity time is longer than 1 minute, the data can be saved.
History of record and more data is available in the APP.
Heart rate – Using Led light to measure heart rate and show status in real time.
Blood pressure – The result of the test will be one measurement score.
Stopwatch – Click the stopwatch to enter it interface. Click the start icon to start time measurement.
Timer – Set the time, then press start button to count down.
Notifications – The message interface allows to view on device messages came on phone as SMS, incoming calls and chat software. Bluetooth connection phone device is required for this function. Note: Notification settings are available in APP. Regardless of the settings in the APP, if the notification does not appear as a notification in the phone, it will not be sent to the device. Check the phone’s notification settings
Find phone – When the device is connected to APP, clicks on Find phone, and the phone will pop up with a ring tone.
Setting
- Message settings – selection, which of your phone applications will show notifications in your device.
- Brightness – setting the brightness of the screen
- Auto-Lock – time of the automatic turning off the screen 11.4.Switch – Switching on/off additional functions of device. 11.5.Device – Information about Model name (Bluetooth name), MAC number(Bluetooth number) and version of firmware. 11.6.Clear data – Restart device with cleaning of settings and data from it memory. Restore to the factory state.
Music – player is launched by swiping up on the main desktop.
To connect the blututth earphones, click the icon and then select “watch”> “earphone”> “new device”. After searching for the earphones or speakers, select their names. To upload music to the device, connect it to the computer with the power cable,and copy the music files to the device memory in the computer interface. The device memory will appear like an external drive. Warning: Although the smart device can monitor health conditions line: real- time dynamic heart rate and blood pressure, it cannot be used for any medical purpose.
Basic Parameters: Screen type: 1,3 inches TFT; battery capacity: 220 mAh; protection level: IP68
Proper disposal of this product. The device cannot be disposed of
together with household waste. To prevent potential threats to the environment
and human health due to improper disposal of waste, it is mandatory to take
used electronic equipment to a designated collection point, or to the place
where the product was purchased for the purpose of recycling electronic waste.
Warning: Lithium battery inside.
This device, smart band model KIX-M, is in compliance with Directive
2014/53/EU of the European Parliament and of the Council. The complete
declaration of conformity is available online at the following link: www.bemi-
electronics.com/certificates
This manual is not covered by the warranty, and the appearance and/or
functionality of the software installed on the device may be different from
the one described. The Guarantor reserves the right to modify the instruction
manual at any time without prior notice.
Maximum power consumption – 0.185W; Standard power consumption – 0.148W; Power
consumption in standby mode – 0.62mW; Operating Frequency Range of device –
2,4 GHz
Manufacturer : Shenzhen Minrek Electronic Ltd.
Address: C602, 6th Floor, Building C, Hangcheng Road, Huafeng International
Robot Industrial Zone, Xi’xiang, Bao’an, Shenzhen, China 518126
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>