SUNSKY T6 2-in-1 Portable Folding Stand Wireless Charging User Manual
- June 5, 2024
- sunsky
Table of Contents
SUNSKY T6 2-in-1 Portable Folding Stand Wireless Charging
Product introduction
This is a multi-functional phone stand with wireless charging, simple design as safe and portable, support Qi standard, compatible with all wireless charging phones which meet Qi standard, this product will give you a safe and convenient using environment.
Operation guide
- Place this stand on desktop, connect with USB cable, now it is standby mode: indication light 1 is on green, indication light 2 is on green
- Put the wireless charging phones on the wireless charging stand, now it is charging mode: indication light 1 is on blue, indication light 2 is on blue
- When it is not in normal working status( something else on it is detected or functional error): the indicator light flashes red and blue,
- The extending feet is free in adjust according to different phone size, the extending pipe is also adjustable for height when in real usage, but it can be also folded when need to take along.
Basic Parameters:
- Input:：9V/2A
- Output: 10W /7.5W /5W
- Charging distance: ≤8mm
- Charging efficiency: ≥76％
Compatible devices:
- HUAWEI：P30 pro, Mate 20 pro,Mate 30,mate 40 ,P40pro
- IPHONE：iPhone 8,iPhone 8 Plus,iPhone X,iPhone XR,iPhone 12,iPhone 12 pro max
- SANSUNG：Note9,S9,S9+,Note8,S8,S8+,S7Edge,S7,Note5, Note6,Note7,S6Edge,S6Edge+,SM-W2019, SM-W2018,SM-W2017
- NOKIAlumia：930，830，1520，1020，820，720，920，925
- GOOGLE Nexus：4/5/6/7
- XIAOMI：MIX2S ，10/10pro ，9/9pro,MIX3
Packing list:
Wireless charging phone stand x1
USB cable x1
User manual x1
Notice:
- Support all devices enable Qi standard;
- If need fast charging.please use QC2.0 or above adaptor;
- All phone cases of magnetic matador Trina holder are not starte
- Please keep the prd Copyfrish
FCC StatementFCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>