Shanghai Shengzhen Commercial Trade 2ANHJGDLINPAD Keypad Instructions

Shanghai Shengzhen Commercial Trade 2ANHJGDLINPAD Keypad

KEYPAD PROGRAMMING INSTRUCTIONS

STEP 1

• PRESS THE OPERATOR’S LEARN BUTTON
• PRESS THE OPERATOR’S FOR 15 SECONDS

NOTE: PRESSING THE LEARN BUTTON FOR MORE THAN 10 SECONDS WILL ERASE ALL KEYPAD CODES AND REMOTE CONTROLS

STEP 2

WHILE THE LEARN LIGHT IS ON, ENTER A 1-6 DIGIT KEYPAD CODE AND PRESS THE KEYPAD’S START/STOP KEY

OPERATOR LIGHTS FLASH WHEN THE KEYPAD CODE IS ACCEPTED

STEP 3

REPEAT STEPS 1 & 2 FOR ANY ADDITIONAL KEYPAD CODES

FCC RULES

Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>