ASKO HG1666A Gas Hob Instruction Manual
- June 1, 2024
- ASKO
Table of Contents
ASKO HG1666A Gas Hob
Product Specifications
- Models: HG1666A, HG6CBE1C, HG1666S, HG6CBE1C, HG1776A,HG7BBE1C, HG1776S, HG7BBE1C, HG1986A, HG9CBE1C, HG1986S,HG9CBE1C
- Pictograms: Important information
Product Description
The gas hob includes standard burner, simmer burner, rapid burner, wok burner,
pan support, drip tray, and control knobs for easy operation.
Operating Instructions
Ignition and Adjustment
Standard Burner:
- Zone indication for high and low settings.
- Control knob for adjusting flame intensity.
Wok Burner with Double Regulator:
- Zone indicator for high and low settings.
- Outer ring for low setting and inner ring for high setting.
- Control knob for regulating the flame.
Maintenance
Use
Wok Ring: Provides stability for woks with a round base.
Small Pan Grid: Allows the use of very small pans.
Burner
Position the pan supports vertically on the drip tray. Use positioning pins to
assemble the burner parts correctly.
Wok Burner
Ensure correct placement of wok burner parts to avoid malfunction.
Cleaning Instructions
Regularly clean burners, control knobs, and pan supports with mild detergent.
Avoid using aggressive cleaning products on stainless steel parts.
Clean the drip tray or glass cover after other components to prevent recontamination.
FAQs
Q: What should I do if there is a smell of gas near the appliance?
A: Check for a leaking appliance connection as it could be the possible
cause. Refer to the manufacturer’s website for more information.
Pictograms used:
Important information
Tip
Instructions for use Gas hob
- HG1666A – HG6CBE1C
- HG1666S – HG6CBE1C
- HG1776A – HG7BBE1C
- HG1776S – HG7BBE1C
- HG1986A – HG9CBE1C
- HG1986S – HG9CBE1C
OPERATING INSTRUCTIONS
Description
- standard burner
- simmer burner
- rapid burner
- wok burner
- pan support
- drip tray
- control knob
Ignition and adjustment
Standard burner
- zone indication
- 0 position
- high setting
- low setting
Each burner is fully adjustable between high and low settings.
- Press the control knob and turn it anticlockwise. The burner will ignite.
- Press the control knob fully for at least 3 seconds between high (3) and low (4) settings. The thermocouple safety pilot has been activated.
Wok burner with double regulator
- zone indicator
- 0 position
- high setting
- outer ring low setting / Inner ring high setting
- outer ring off / inner ring high setting
- inner ring low setting
The wok burner with double regulator is easy to control.
- The outer ring can be adjusted between high setting and low setting between positions 3 and 5. The inner ring will then continue to burn on high setting.
- Press the control knob between positions 5 and 6.
The outer ring will switch off and the inner ring can be adjusted between high setting (6) and low setting (7).
MAINTENANCE
Use
Pans
-
Always ensure that the flames remain under the pan.
A lot of energy is lost if flames burn around the pan. The handles may also become too hot. -
Do not use pans with a base diameter smaller than 12 cm. Smaller pans are not as stable.
Wok ring
The wok ring for use with the wok burner supplied or obtainable as an
accessory provides extra stability for woks with a round base.
Small pan grid
The small pan grid supplied or obtainable as an accessory makes it possible to
use very small pans.
Pan support
Place the pan supports vertically, without sliding over the drip tray.
Position the pan supports on the drip tray in the correct way.
Burner
Use the positioning pins (1) to put the burner parts together.
Wok burner
Place the wok burner in the correct way. Placing the wok burner parts
incorrectly can result in a non-functioning or poorly functioning burner.
Maintenance
Regular maintenance after use prevents food residue from encrusting and
creating persistent stains. Use a mild cleaning detergent to remove stains.
Clean the control knobs, burners and pan supports first and then the drip tray
or glass cover. This will prevent the drip tray or glass cover from becoming
dirty again during cleaning.
Attention! Burner parts should not be cleaned in the dishwasher.
Dishwasher detergents can corrode burner parts!
Stainless steel drip tray with coating
Drip trays with an ‘easy clean’ coating are easily cleaned with a mild
cleaning detergent. Do not use aggressive cleaning products! They may damage
the coating.
Persistent stains on enamel (pan supports, burner caps, drip trays) Persistent
stains can best be removed with a fluid detergent or a plastic scouring
sponge. Never use scouring powder, scouring pads, sharp objects or aggressive
cleaning products.
Brass wok burner parts
Some wok burner parts are made of brass. It is not unusual to see a change in
the colour of the brass as a result of the high temperatures involved in wok
use.
Consult the www.asko.com website for additional maintenance and cleaning
instructions!
FAULTS
Fault table
If your gas hob does not work properly it does not always mean that it is defect. Try to solve the problem yourself first by checking the points in the table below or check the ‘www.asko.com ’ website for more information.
ENVIRONMENTAL CONSIDERATIONS
Disposal of the appliance and packaging
Sustainable materials have been used during manufacture of this appliance.
The appliance packaging is recyclable. The following materials may have been
used:
- cardboard;
- paper;
- polyethylene film (PE);
- CFC-free polystyrene (PS-rigid foam);
- polypropylene tape (PP).
Dispose of these materials in a responsible way and in accordance with government regulations.
The product has been marked with a crossed-out dustbin symbol to remind you of
the obligation to dispose of electrical household appliances separately.
This means that at the end of its working life, the product must not be
disposed of as urban waste. It must be taken to a special local authority
differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance such as this hob separately avoids possible
negative consequences for the environment and health and enables the
constituent materials to be recovered, resulting in significant savings in
energy and resources.