LEDYI Lighting RT5 Touch Wheel RF Remote Controller Instruction Manual
- June 5, 2024
- LEDYI Lighting
Table of Contents
Touch Wheel RF Remote Controller
Model No.: RT5/RT10
1 and 4 zone RGB+CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Features
- Apply to RGB+CCT LED controller.
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receivers.
- AAAx2 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on the back holder.
Technical Parameters
Input and Output
Output signs| RF12.4G1–121
Working voltage-:| 3VDCIAAAx2)
Working current| <5mA
Standby current| < 1 Opa
Standby time–| 1 year
Remote distance| 30m(Barrier-free space(
Environment
Operation temp:| Tr+5.56C
IP rating| IP20
Safety and EMC
EMC standard (EMC)| EN301 489,EN 62479
Safety standard(LVD)| EN60950
Radio Equipment(RED)| EN300 328
Certification| CE,EMC,LVD,RED
Warranty
Warranty| 5 years
Weight|
---|---
Gross weight| 0.048kg
Net weight| 0.088kg
Mechanical Structures and Installations
To fix the remote
,three options are offered for selection
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote’ back holder on the wall with two screws.
Option 3: adhere the remote’ back holder to the wall with a paster.
Operation
- When turning on the light, the indicator displays blue. when turning off the light, the indicator display red.
- When touching the color wheel, the indicator will display the same color.
- When the press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter the sleep state, you need to press any key to make the touch wheel quit sleep state.
Match Remote Control (two-match ways)
End-user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press the match key, immediately press the on/off key (single-zone
remote) or zone key (multiple zones remote) of the remote.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key for 5s to delete all matches,
The LED indicator fast flash a few times means all matched remotes were
deleted.
Use Power Restart
Match:
Switch off the power, then switch on power again, immediately short press the
on/off key (single-zone remote) or zone key (multiple zones remote) 3 times on
the remote.
The light blinks 3 times means the match is successful.
.Delete:
Switch off the power, then switch on power again, immediately short press the
on/off key (single-zone remote) or zone key (multiple zones remote) 5 times on
the remote.
The light blinks 5 times means all matched remotes were deleted.
Key function
● RT5 1 zone RGB+CCT remote
: Turn on/off the light.
: Touch to change RGB color or color temperature.
Press RGB or CCT key to switch between the RGB wheel and the CCT wheel.
: Adjust RGB or color temperature brightness, short press 10 levels, long
press 1-6s for continuous 256 levels adjustment.
: Adjust the color temperature by WW/CW channel, short press 11 levels, long-
press adjust WW+CW brightness continuously
: Short press gets 24 kinds of static RGB color.
: Short press run next dynamic mode, long press 2s run mode-cycle.
: For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get
the default speed.
For static RGB color, adjust saturation, namely change current static RGB
color to mixed white slowly, short press 11 levels, long press 1-6s for
continuous 256 levels adjustment.
: Short press get red green or blue color directly.
long press 1-6s to adjust R/G/B brightness continuously to achieve millions of
colors
: Short press turn on/off white(WW/CW), long press 1-6s to adjust white(WW+CW)
brightness continuously, namely change saturation by adding white color
slowly.
: Short press recall the scene, long press 2s save the current color into S1
S2/. the LED indicator display green when saving OK.
● RT10 4 zone RGB+CCT remote
Each zone can match single color, dual color(WW/CW), RGB, RGBW, or
RGB+CCT(WW/CW) controller or lamp.
For example, the long press key for 2s will set zone 1 as RGB light type.
When the remote type change OK, the green indicator goes on for a long time.
: Short press turn on/off all zone lights.
: Touch to change the current zone RGB color or color temperature.
Press RGB or CCT key to switch between the RGB wheel and the CCT wheel.
: Short press select and turn on zone light, long press 2s turn off zone
light.
: Adjust RGB or color temperature brightness, short press 10 levels, long
press 2s get a min or max brightness.
: For dual-color or RGB+CCT(WW/CW), adjust the color temperature by WW/CW
channel, short press 11 levels, long-press adjust WW+CW brightness
continuously.
For RGBW, adjust the color temperature by adjusting W channel brightness, by
11 levels.
: Short press gets 24 kinds of static RGB color.
: Short press run next dynamic mode, long press 2s run mode-cycle.
: For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get
the default speed.
For static RGB color, adjust saturation, namely change current static RGB
color to mixed white slowly, short press 11 levels, long press 1-6s for
continuous 256 levels adjustment.
: Short press recall the scene, long press 2s save current state into S1/S2.
the LED indicator display green when saving OK. 4 zone recall or save
synchronously.
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing the battery, pay attention to the battery’s positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle the remote, beware of falling.
-
For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>