HEB Lighting E1-D Door Sensor Switch User Manual
- June 5, 2024
- HEB LIGHTING
Table of Contents
HEB Lighting E1-D Door Sensor Switch
Features
- Door sensor switch, connected directly to the low voltage LED strip.
- When the door opens, or no obstacle ahead, the strip turns on gradually. When the door close, or obstacle ahead, the strip turns off gradually.
- Max 4A output current, max output power 96W@24V.
- Generally installed in the aluminum lamp strip housing.
- 3M paste in the bottom of the PCBA makes easy installation and security.
- Low cost and high stability.
- Widely used in wardrobe lights.
Technical Parameters
Input and Output
Input voltage| 12-24VDC
Output voltage| 12-24VDC
Output power| Max. 48W@12V Max. 96W@24V
Sensor data ⩽
Detective distance| 10cm
Detevtive angle| 15-30
Safety and EMC
EMC standard (EMC)| EN301 489,EN 62479
Safety standard(LVD)| EN60950
Certification| CE,EMC,LVD
Warranty and Protection
Warranty| 5 years
Protection| Reverse Polarity
Dimension
Installation attention
- Cut a hole in size L7 x H5mm on the side of the aluminum profile.
- Put mini sensor switch into profiles when power is off, put the detector head to the hole, detector head should face to the objects.
- Pay attention to power input and LED output polarity.
Wiring Diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>