Neomounts NM-TC100BLACK CPU Holder Instruction Manual
- June 5, 2024
- Neomounts
Table of Contents
Neomounts NM-TC100BLACK CPU Holder
Tools
PARTS
STEP 1
Disassemble the Thin Client holder
STEP 2 A Pole installation
install the Thin Client holder on the pole and place the protective
strips
STEP 2 B Pole installation
Assemble the Thin Client holder, adjust depth if necessary and place the
Thin Client
STEP 2 C Pole installation
Place and tighten the safety belt
STEP 2 A Desk installation
Place the protective strips
STEP 2 B Desk installation
Place the safety belt and install the Thin Client holder under the
desk
STEP 2 C Desk installation
Assemble the Thin Client holder and adjust depth if necessary
STEP 2 D Desk installation
Place the Thin Client and tighten the safety belt
STEP 2 A VESA plate installation
Install the Thin Client holder on the bracket and place the protective
strips
STEP 2 B VESA plate installation
Assemble the Thin Client holder, adjust depth if necessary and place the
Thin Client
STEP 2 C VESA plate installation
Place and tighten the safety belt
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The man face.Jrer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- tt is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high tempered.Jres, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock: or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall. ceiling or floor and select a secure mounting location.
- The wall. ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earthquake or another strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all saews (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Please consult the English language manual for any dispute on conditions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>