TOZO S1 Smartwatch User Guide
- June 5, 2024
- TOZO
Table of Contents
QUICK STSRT GUIDE
Product Details
Back key: Short press to go to the menu(time page).
Power ON/OFF key: Long press to turn on/of. Short press to go back to the
previous interface.
Heart rate: Used to check the heart rate.
USB charging port: Charge the watch by using the USB cable.
Charging the device
Watch charging and activation Recharge activation is required before using the watch for the first time. Use the equipped magnetic charger to attract the metal contacts at the back of the watch, and the other end of the charger can be connected to a standard outlet or the computer USB port
Watch instructions
a.Long press one of the standby interface(time page )to switch to different
styles of the dial.
b.Swipe up to enter the main menu at the standby interface.
c.Swipe down to enter the setting interface at the standby interface.
d.Swipe right to enter message notification list/alarm/stopwatch/control of
music and camera/timer/find phone/exercise/heart-rate/sleep/step count etc.
e.Swipe left to enter the step count interface at the standby interface is the
to swipe right reverse operation.
One class interface
| | 
| 
---|---|---|---
Step count : Data of step count.| Sleep: Record deep and shallow
sleep times, sleep monitoring times from 19:00 – to 7:00.| Heart rate:
Click on the interface to correctly wear the watch for heart rate monitoring,
Set for automatic heart rate detection, and detection frequency according to
the APP’s instructions.| Exercise: Running, hiking, cycling, and
mountaineering are the four modes.
| | | 
---|---|---|---
Weather: The weather page will show the current weather, air quality
information, and weather conditions for the next 5 days. Weather information
needs to be connected to the APP before getting the data.| Camera: When
connecting your phone, the watch can be used as a remote control for your
phone’s camera. Click on the interface to take a picture.| Music: After
connecting your phone, the watch can control your phone’s music player. When
your phone plays music, you can use your watch to control your phone to play,
pause, play the next song, play the previous song| Other feature
interfaces: Stopwatch, alarm clock, timer, brightness adjustment, vibration
switch, Do not disturb mode, factory reset shutdown, about APP download (OR
code)interface.
App download
Scanned below OR code to download TOZO Watch APR
Search and download the “TOZO Watch” APP in the APP store for i0S.
Search and download the “TOZO Watch” APP in the Google play store for Android.
Connect the device
a. Turn on your phone Bluetooth.
b. Open TOZO Watch APP to set personal information.
c. Switch to the device page and click the adding device button.
d. Select TOZO-S1 in the device list.
After the successful connection of the watch, each time you open the app in
the future, the watch will automatically connect with the phone, in the app
data page, you can synchronous data.
NOTE: To ensure the data is valid, please enter the real information in
the APP profile.
APP feature settings
a. APP notification settings:
Call notification:
When receiving calls, the watch will continuously vibrate to remind you. You
can choose to click the reject icon.
SMS notification:
The watch can receive phone messages that include personal app messages.
Personal applications:
The watch can receive push notifications from the APP.
b. Sedentary Sedentary reminder:
The watch will prompt you to get up and walk after you have been sitting for
half an hour.
c. Drink reminder:
When the set time for water drinking arrives, the watch has the vibration and
has shown the water icon.
d. Heart rate detection:
Set the time interval for heart rate check.
e . Find device:
The watch is successfully bound to the app. Click on the phone app to find the
watch, and the watch will light up and vibrate.
f. Raise hand:
Turn on raising your hand to wake the screen, when the watch is off, raising
your hand will automatically wake the screen.
g. Do not disturb:
Turn on raising a hand to wake the screen, When the Do not disturb mode is
turned on, only the watch and alarm have vibration reminders.
Frequently asked questions and answers
0: Why can not I wear a watch to take a hot bath?
A: The bath water temperature is relatively high, it will produce a lot of
water vapor, and the water vapor is in the form of gas. Its molecular radius
is small so it is easy to Infiltrate into the gap of the watch’s casing, and
once the temperature drops, water vapor will recondense Into liquid. It Is
easy to cause a short circuit inside the watch, hence damaging the watch
circuit board and the watch itself.
0: Why can not the watch receive the message push?
A 1. Confirm the message push switch Is enabled on the APP. 2. The
confirmation message can be displayed normally In the mobile phone
notification bar. The watch message push is pushed by reading the mobile phone
notification bar message” there is no message in the mobile phone notification
bar, the watch will not be able to receive the push need to find the
notification setting and open notifications for WechatSMS.WhatsAppTwItter etc.
on the Phone APP.
| 
---|---
info@tozostore.com| www.tozostore.com
Thank you for purchasing the TOZO authentic product.
For more latest products, pans, and accessories,
please visit: www.tozostore.com
For any assistance please contact Email: Int
oetozostore.com
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. FCC Radiation
Exposure Statement This device complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.