globe GL59429A Wi-Fi LED Lighting Fixtures Instructions
- June 5, 2024
- globe
Table of Contents
*59429_W_C
Designer: RP
Docket:** 10-026-20
PRINTING SPECIFICATIONS FOR SKU:
CARD DIMENSION
LIMITED WARRANTY:
This light is warranted to last 2 years from the date of purchase based on the
use of 3 hours per day. If it fails before that time, we will replace it. Send
Globe Electric the light, proof of purchase, and register receipt along with
your complete name and address. See caution text for proper use. This warranty
is void if this product is misused in any way. This replacement is the sole
remedy available and liability for incidental or consequential damage is
expressly excluded.
CAUTION: DO NOT USE WITH A STANDARD DIMMER. The track light can be
switched to different operating modes and is dimmable through the Globe Suite™
App. For use only in 120V/60HZ circuits. Risk of electrical shock. Do not
open, no user-serviceable parts inside. This device is not intended for use
with emergency exit fixtures or emergency exit lights, photocells, and
electronic timers. This device is intended for indoor use or weather-protected
fixtures. Do not use where directly exposed to water. The minimum operating
temperature is -20°C (-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly
approved by the manufacturer would void the user’s authority to operate the
equipment. This Class B digital apparatus complies with CAN ICES-005(B).
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard (s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
FCC RESPONSIBLE PARTY
PARTIE RESPONSABLE FCC
Globe Electric / Globe Électrique
1-888-353-1388
15301 Shoemaker Ave
Norwalk, CA 90650
www.globe-electric.com
Globe Electric Company
Compagnie Globe Électrique
59429* 10-026-20