ALIGATOR 1634300982 Smart Wi-Fi Photo 10.1 Inch Frame User Manual
- June 5, 2024
- ALIGATOR
Table of Contents
ALIGATOR 1634300982 Smart Wi-Fi Photo 10.1 Inch Frame
Description of the device
(see picture on the front cover)
- A Power Button
- B Move up/down in the menu (normally not used) C Volume +/-
- D Back/Menu button
- E SD card slot
- F Headphone connector
- G USB connector
- H Mini-USB connector
- I Power connector
How to start
- Connect the supplied power supply to the power connector I and then to a AC wall socket.
- Wait until the language selection menu appears (note that it may take a few minutes to initialize)
- Tap the desired language from the menu and tap the arrow symbol on the bottom right to continue.
- Select the Wi-Fi network to which the frame will be connected and enter the password for the connection.
- The updates page will appear, tap the arrow on the bottom right to continue.
- Enter the name, frame location and time zone by tapping the appropriate item (the keyboard will appear on screen, to hide the keyboard, tap on the screen outside the keyboard).
- Tap the arrow on the bottom right to continue.
- You‘ll see a guide on how to use Frameo to add friends and family members who can send you photos and videos from their mobile phones directly to your photo frame.
- To move to the next/previous page of the guide, swipe your finger from right to left or vice versa. You can skip the guide by tapping „Skip“ at the bottom left.
- Once the wizard is complete, a screen will appear with icons for adding friends and settings. Add friends to receive and view photos. The frame is now ready to use.
- The acquired photos are displayed on the screen one by one. You can move between them by sliding your finger across the screen from right to left or vice versa. Tap the screen to display the menu. Switch the screen on/off using the power button A .
Using the photo frame
This photo frame uses the Frame system. For more information on how to use it, please see the Frameo User Manual, which can be found at www.alligator.cz/frame View photos from an SD card or USB flash drive In addition to photos and videos sent by friends and family over the internet, you can also view photos stored on the SD card.
- Insert an SD card or connect a USB flash drive with photos.
- Tap the screen and select the settings icon .
- Select Manage photos, then select Import photos.
- An overview of the photos will be displayed. Tap on a photo to select it for adding to the photo frame gallery.
- After selecting the photos you want to add, tap the arrow icon in the top right corner of the screen.
- The photos will be added to the gallery and displayed on the screen.
Safety and ecology
Never dispose of an end-of-life product in regular municipal waste!!! After
use, it must be handed over to the appropriate collection point for recycling
or environmentally friendly disposal. Failure to comply with these
instructions is illegal. This product may contain substances hazardous to the
environment. For more detailed information on how to dispose of the used
product, please contact your dealer or municipal authority.
Declaration of conformity
ADART COMPUTERS
s.r.o. hereby declares that type ZN-DP1003/ZN-DP1005 radio equipment complies
with Directive 2014/53/EU. The full text of the EU Declaration of Conformity
is available on the following website:
www.aligator.cz