DRAPER 2074 230V Soldering Iron Instructions
- June 5, 2024
- DRAPER
Table of Contents
DRAPER 2074 230V Soldering Iron
INSTRUCTIONS FOR USE:
- Objects to be soldered must be clean. Conductors should be cleaned with steel wool or fine sandpaper.
- Before using this iron for the first time the tips should be tinned using a cored solder or flux until tip is coated with solder.
- Be sure tips are tinned before commencing to solder. Occasional re-tinning will ensure good solder connections.
- Apply tip to the work, then apply solder to the work at the point of tip contact.
- Remove the tip from the work. Molten solder must cool undisturbed.
- Do not use more solder than necessary. Just enough to make a good connection.
- Use resin core solder for radio and electrical connections.
- Use acid core solder only where flux residue may be washed and cleaned away. Acid core solder is mainly used for mechanical connections and rarely used for electrical connections.
- After using with acid core, clean soldering iron tip thoroughly.
Spare Tips:
- Fine – quote Stock No. – 62079
- Medium – quote Stock No. – 62080
- Large – quote Stock No. – 62082
customer service
Helpline: +44 (0) 23 8049 4344 Sales
Desk : +44 (0) 23 8049 4333 General
Enquiries: +44 (0) 23 8026 6355
internet: drapertools.com
email: sales@drapertools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>