DRAPER LFU-20 Ultra-Slim Single Fluorescent Instruction Manual
- June 5, 2024
- DRAPER
Table of Contents
DRAPER LFU-20 Ultra-Slim Single Fluorescent
INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools, which should be kept in a safe
place. This manual describes the purpose for which this lamp frame has been
designed and contains all the necessary information to ensure its correct and
safe use.We recommend that this manual is read before any operation of the
lamp, before performing any kind of adjustment to the lamp, and prior to any
maintenance tasks. By following all the general safety instructions contained
in this manual, it will ensure both lamp and operator safety, together with
longer life of the lamp itself. All photographs and drawings in this manual
are supplied by Draper Tools to help illustrate the operation of the lamp
frame. Whilst every effort has been made to ensure accuracy of information
contained in this manual, the Draper Tool policy of continuous improvement
determines the right to make modifications without prior warning.
SPECIFICATIONS
- Rated voltage: AC 220-230V~50Hz.
- λ=0.90C, µ=0.95, Tc=50°C, prospective heat time > 0.4s unusual protection.
- Products of LFU series are assembled with G13 lamp holder and T8 lighting tube (not supplied). They are easy to carry and install, and can be connected together to a maximum of 8 fittings.
DECLARATION OF CONFORMITY
We Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 63262 & 63263. Part Nos:- LFU-20 & LFU-40. Description:- Fluorescent Lamp Frame. To which this declaration relates is in conformity with the following directive(s) 73/23/EEC & 89/336/EEC. With reference to: EN60598-1, EN50081-1, EN55022, EN61000-3-2/-3, EN50082-1, EN61547, (EN61000-4-2/-3/-4/-5/-6/-11).
INSTALLATION
- Mark fixing holes in desired location on mounting surface.
- Connect the mains supply wire to the relevent contact points in the terminal block supplied.
- Once all wiring connections are complete, mount the lamp frame in the position required, then carefully install the fluorescent tube (not supplied).
- 4. If in doubt consult a qualified electrician for advice or installation.
- Frame
- End cover
- Fluorescent tube (not supplied)
- Terminal block
DRAPER TOOLS LIMITED
Hursley Road, Chandler’s Ford, Eastleigh, Hants. SO53 1YF. U.K. Helpline:
(023) 8049 4344. Sales Desk: (023) 8049 4333. General Enquiries: (023) 8026
6355. Fax: (023) 8026 0784.www.draper.co.uk e-mail:
sales@draper.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>