Shenzhen Yingruier Technology KC1 Wireless Headset User Manual

Shenzhen Yingruier Technology KC1 Wireless Headset

How to get support

If any problem occur to your headset, please do not hesitate to contact with us Before you return it or leave a review.

Benefits to contact with us:

1. Extra 6 months warranty
2. Over 50% off on every of our new products
3. Solve your problem quickly
4. Life-time customer support

The way to get to us:

www.yuwiss.com
E-mail: support@yuwiss.com

Introduction

• (Before pairing) Power on
  Press and hold the multi-function button (Simplify “MFB”) 3 seconds.

• (Anytime but calling) Power off
  Press and hold the MFB 4 seconds when ii is on.

• (After pairing) Play / Pause Music
  Press multi-function button (Simplify “MFB”) to play and press again to pause music.

• (After pairing) Answer phone calls
  Press the MFB once to pick up an incoming call.

• (After pairing) Hang up phone calls
  Press the MFB once again to hang up when you want to finish a phone call.

• (After pairing) Reject phone calls
  Long press the M FB for 2 sec to reject an incoming call.

• (After pairing) Redial last calling number
  Twice Press MFB quickly to redial last phone number.

• (After pairing) Turn up / Turn down volume
  Press the volume button “+” once to turn volume up Press the volume button “-” once to turn volume down

• (After pairing) Next / Previous song
  Long press the volume button “+” for 2 sec to go to next song. Long press the volume button “-” for 2 sec to go to previous song.

• (After pairing) Voice Dialing
  Press the multi-function button (Simplify “MFB”) 3 sec to summon voice assistant/Siri. Note: If you have Samsung phones, please contact with Samsung technician support to active voice assistant firstly so that you can follow above steps to summon voice assistant.

• (Before pairing) Change Language
  Under pairing mode (Means that do not connect with any devices after power on), andtwice press volume button “+” to change language into English or Japanese (If you are in English, you will hear a sound “English selected”)

• (Before pairing) Reset the headset
  Under pairing mode, and holds the volume buttons “+” and “-” together for 5 sec, then you will hear a tone “Du-du” and the LED light will flash Red and Blue at the same time.

How to pair

1. Turn on the Bluetooth headset, then the headset will automatically enter pairing mode.
2. Enabled your phone’s Bluetooth, find this headset’s name “KC1”, then select and connect with it. You will hear a tone “Connected” on the headset.
   Note: If your phone is an Android phone, please allow our headset to access to your phone audio and media audio so that you can use our headset normally.

How connect with two devices simultaneously:

1. Connect the headset with your fist device. (Connection steps please follow above “How to Pair”)
2. After connected with the first device successfully, turn off the Bluetooth of the first device, then the KC1 headset will go back to pair mode.
3. Enable the second device Bluetooth, then connect with the KC1 headset as well. (Connection steps please follow above “How to Pair”)
4. After connect with the second device successfully, turn on the first device·s Bluetooth and select and connect with the KC1 headset again. You can hear a tone “connected”
5. In the end, you find your two devices had been connected with the KC1 headset at the same time.

FAQ

1. Q1 : Bluetooth headset is unable to pair? A 1 : Please do the following:
2. Reboot the headset
3. Press button of VOL+/- together 5sec to reset the headset (Reset successfully when the Red and Blue LED lights flash together)
4. Q2: What if the headset keep falling out? A2: Please do the following:
5. Change the smaller ear tips or put on an ear hook.
6. Make sure wearing them in your ears correctly.
7. Q3: What if my headset cannot be charged? A3: Please do the following:
8. Charge the headset with stable current (Such as laptop)
9. Charge your headset for 5-10 minutes
10. Q4: Too much background noise after pairing? A4: Please do the following:
11. Please recharge your headset
12. Get your headset closer to your cellphone.
13. Stay your headset away from electrical or magnetic object.
14. Q5: How can I get a replacement? A5: Please do not hesitate to contact with us. We can provide free replacements.
15. Q6: How can I change the language? A6: Turn on your headset and DO NOT pair with any device, press the up volume button twice quickly(“+” Button), stop until you hear a sound said “English selected”.
16. Q7: What if my headset doesn’t work as well as I expected? A7: Please do not hesitate to contact with us detailing your problem and your order number, we will help you solve your problem completely.
17. Q8: I still don’t understand how to use? A8: Please do not hesitate to contact with us. We even can provide some videos that we filmed to let you understand better.

Note:

1. Use and keep this headset at room temperature.
2. Do not throw it away to avoid damage.
3. Do not disassemble the headset without technician.
4. Use DC 5V USB charger to charge the headset to protect the battery.
5. If the headset cannot stay in your ears, please change a smaller ear tip or put on an ear hook
6. To get more after-sale supports, contact us at support@yuwiss.com

Package

• 1 Wireless headset 1
• 1 User manual
• 1 USB charging cable
• 3 Ear tips
• 3 Ear hooks

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>