SMART STEP WK03XXXB Activity Center Walker Instruction Manual

Read all instructions BEFORE assembly and USE
of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
4m+

WK03XXXB Activity Center Walker

Bounce N’ Glide 3-in-1
Activity Center Walker
WK03XXXB
Instruction Manual

WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE, AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear, and ear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. The Customer Service Department can be contacted at 1 800-328-7363
Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.
Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

**** WARNING

WARNING: Younger infants between 4 to 6 months are right at the critical age to be considered safe while playing in a seated-style activity center. Your child MUST ALREADY be able to hold their head upright and steadily unassisted before being placed in the activity center. DO NOT use the activity center if they cannot.
STRANGULATION HAZARD
Strings can cause STRANGULATION!

• DO NOT place items with a string around the child’s neck, such as hood strings or pacifier cords.
• DO NOT suspend strings over products or attach strings to toys. The Stationary Activity Center is: Only for use by infants at least 4 months old and who can hold their heads up unassisted.

FALL HAZARD!
Babies can FALL from the unit resulting in head injuries.

• Never leave a child unattended. Always keep the child in view while in the product.
• Never use near stairs, stoves or ovens, heaters, fireplaces, swimming pools, or other dangerous areas. To avoid tipping over, place the product on a flat, level surface.
• NEVER lift this product with your child in it.
• NEVER place product on countertops, tables, or any other elevated surface.
• Do not use the Dome base alone or leave it on the floor to avoid slipping or tripping over it. Always store Dome away when not in use with the product.
• ALWAYS make sure to lock the seat before using the walker mode. Refer to the corresponding Fig. 8b.

IMPORTANT! Discontinue use in any mode if the child can climb out, begins to walk, or reaches 30 pounds in weight or 32 inches in height.

• Clean the stoppers on the walker base regularly to maintain stopping performance.
  Do not use the stationary activity center if it is damaged or broken. Discontinue use should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.

Read all instructions before assembly and use of the stationary activity center.
Keep instructions for future use.
IMPORTANT! To ensure the safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
WARNING: Use only on flat surfaces free of objects that could cause the walker to tip over.

• DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF.
• Periodically inspect seat pad plastic tabs to be sure they are secured in the body. DO NOT USE THE
  WALKER IF IT IS DAMAGED OR BROKEN.

WARNING: To avoid burns, keep the
child away from hot liquids, ranges, radiators,
space heaters, fireplaces, etc.
WARNING-STAIR HAZARD:
Avoid serious injury or death, block stairs/ steps securely before using a walker.

PARTS PIEZAS

Check that you have all the parts for this model before assembling the Activity Center. BABY TREND ®CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through
Friday between 8:00 a.m. and 4:30 p.m. (PST).
Return Authorizations are required prior to returning product(s) to Baby Trend®.

ASSEMBLY

TABLE LEGS

1. • Insert each leg into the base until it is securely attached (Fig. 1a).
   • Insert the tabletop into all 3 legs (Fig. 1b).
   NOTE: Ensure that each pin clicks into position and secure all legs into place.
   • Be sure to line up the tabletop tray logo with the base that has the imprinted “FRONT” lettering (Fig. 1c).
   SWIVEL SEAT MODE

2. • Push the tabs inward to detach the seat from the top plate before assembling (Fig. 2a).
   • Align the seat to the center opening and press it down firmly. The seat must completely click into to the tabletop (Fig. 2b).
   NOTE: Rotate the seat to ensure the swivel function is active.
   • To adjust the seat strap, push up on the strap to tighten it. Flip the clip to loosen the seat (Fig. 2c). BATTERY INSTRUCTION

3. • The Lion Toy requires 2 AAA batteries. Reference (Fig. 3) for battery installation. Unscrew the battery door and pull outward. Install batteries as shown. Secure the battery door with a screw.
   
   WARNING:
   • Requires two AAA (LR03) batteries (not included) for toy operation.
   • Non-rechargeable batteries are not to be recharged.
   • Different types of batteries or new and used batteries are not to be mixed. Batteries need to be inserted with the correct polarity.
   • Exhausted batteries are to be removed from the toy.
   • The supply terminals are not short-circuited.
   • Rechargeable batteries are to be removed from the toy before being charged.
   • Rechargeable batteries are only to be charged under adult supervision.
   HEIGHT POSITIONS
   IMPORTANT: Never change the height when the baby is in the walker.

4. • To adjust the height position(s), push the button on the table leg to the desired position. Repeat for the other  sides.
   NOTE: Each leg has 3 adjustable height levels. ALWAYS adjust all 3 legs to the same level (Fig. 4).
   TOY ATTACHMENT

5. • Place toys in this order as shown. Toys must be properly attached before use (Fig. 5a). NOTE: ONLY the flower, lion, and mirror stand-alone toys are interchangeable.
   • All toys must be aligned with their single or double tab housings on the activity center tray (Fig. 5b). Set the toy base in alignment with the tabletop fitting. From underneath the tabletop push the lock up and turn it left to lock.
   • Use the diagram below (Fig. 5c) to lock the toys onto the tabletop. (1) Push the tab up and rotate it left to lock. (2) Rotate the tab right to release the toy. (3) Always put the small tab lock back into the tabletop when not in use.
   FRONT WHEELS
   This product converts into (3) Modes: Walker Mode, Air Bouncer Activity Center Mode, and Stationary Activity Center Mode. See pages 13-14 to use the different modes.

6. • Locate the two front wheels under the base shown on the diagram (Fig. 6a).
   • Pull the wheel out from the base, and straighten the wheel (Fig. 6b).
   • Push the wheel upward until it clicks into the base (Fig. 6c). Repeat for the other side.
   • HIDE WHEELS: To tuck away the wheels,  pull the wheel out from the base and reverse the steps above. Repeat for the other side.
   REAR WHEELS

7. • Locate the two rear wheels on the diagram (Fig. 6a).
   • Pull the wheel out from the base, and straighten the wheel (Fig. 7a).
   • Push the wheel upward until it clicks into the base (Fig. 7b). Repeat for the other side.
   • HIDE WHEELS: To tuck away the wheels, pull the wheel out from the base and reverse the steps above. Repeat for the other side.
   

MODES

WALKER MODE
WARNING: For 4 months up to 30lb. use ONLY.
ALWAYS make sure to lock the seat before using the walker mode. Refer to the corresponding Fig. 8b.

8. • ATTENTION: MUST remove the Air Bouncer Board.
   • To use the wheels, refer to steps 6 & 7.
   • Ensure the seat is aligned with the front tray and the front of the base (Fig. 8a).
   • LOCKING SWIVEL SEAT TO FRONT POSITION: To lock the seat in place, locate the lever underneath the tabletop. The seat tab should be aligned with the lever.
   Push in, to lock (Fig. 8b).
   AIR BOUNCER ACTIVITY CENTER

9. • Tuck away the front and rear wheels before inserting. Reverse steps 6 & 7.
   • Insert the Air Bouncer Board into the bottom platform (Fig. 9).
   NOTE: Ensure to push down once it lays flat. STATIONARY ACTIVITY CENTER MODE
   WARNING: For 4 months up to 30lb. use ONL

10. • ATTENTION: MUST remove the Air Bouncer Board and Tuck wheels in to set into “Stationary” Mode.
    • Tuck in the wheels, refer to steps 6 & 7.
    • To remove, gently lift the walker up, and remove the Air Bouncer Board (Fig. 10).
    

UNFOLD

DISASSEMBLING THE ACTIVITY CENTER
Ensure all the toys are removed from the tabletop before disassembling.

11. • SEAT REMOVAL:
    To remove the seat, use the edge of the seat to lift it off the tabletop (Fig. 11a).
    • Ensure all the toys are removed, and the seat.
    • TABLETOP: To remove, push the 3 pins located on each table leg (Fig. 11b). Repeat the process for the other table legs.
    • 3 TABLE LEGS: To remove, locate the tab underneath the base. Pull the tab towards you and remove the leg (Fig. 11c).
    Repeat for the other sides.
    

MAINTENANCE

SEAT FABRIC
DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

12. • To remove the seat fabric for maintenance, pull out all the plates from the tab on the seat base (Fig. 12a).
    • To reattach the fabric, insert the warning label side towards the backrest of the seat base. Fold the fabric over and insert the rear center plate into the tab. Continue to connect all plates around the seat base tabs. All plates and tabs must be secured before use (Fig. 12b).
    STOPPER REPLACEMENT
    For replacement, if lost or damaged ONLY.

13. • The Stoppers are there for Stair Safety reasons, do NOT remove the stoppers unless for replacement purposes.
    • REMOVAL: To remove, pull out the stopper (Fig. 13a).
    • REATTACH: Push the stopper into the housing completely (Fig. 13b). Ensure to apply enough pressure when inserting the stoppers.
    WHEEL REPLACEMENT

14. • REMOVAL: (1) Pull the small tab away from the pin. (2) Pull the pin out of the slots (Fig. 14a).
    NOTE: May require a screwdriver to completely remove the pin.
    • Release the wheel from the housing (Fig. 14b). Repeat for the other sides.
    RE-INSTALL: To re-attach the wheels, reverse the steps above. Ensure the holes on the wheels are aligned with the holes on the base (Fig. 14c).
    

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST) www.babytrend.com
WK03XXXB_2L_112321

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>