SentrySafe P008E Compact Electronic Safe Owners Manual
- September 19, 2024
- SentrySafe
Table of Contents
SentrySafe P008E Compact Electronic Safe
Getting started
Thank you for purchasing a SentrySafe Product. SentrySafe is the world leader in fire/water resistant and security storage. This guide describes how to easily set-up the product.
Contents Include:
- Compact Safe (1)
- Tethering cable (1)
- Black key lock cover (1)
- Interior padding (1)
- Override keys (2)
- Owner’s manual
- Warranty card
Instructions
- Locate override keys.
- Keys are stored in the packaging material. Remove them before discarding the box.
Registration: To be eligible for warranty coverage, the original purchaser must register the product online at www.sentrysafe.com.
PRODUCT USAGE INSTRUCTIONS
Opening your security safe using the override key
- Remove the cover from the key lock.
- Insert the override key into the key lock, and turn the key counterclockwise, one quarter-turn to the unlocked position.
- Turn the knob counter-clockwise, one-quarter to the unlocked position.
- To open, lift from the outer edge of the lid.
Note: to lock, return knob and key to the locked position.
Installing batteries
- Slide the cover of the battery compartment.
- Properly insert batteries, replace the cover, and close the security-safe lid.
Programming 2 different personal codes
Buttons 0-9 are used for user codes. When buttons are pressed, the green light flashes. If no keys are pressed for 20 seconds the lock automatically resets to readiness, which requires the pass code to be re-entered
To set the first code:
- Press the red setting button on the inside of the lid, the light will turn orange and 2 beeps will be heard.
- Input a code of 1-8 digits using the 0-9 keys.
- Then press either “ * ” or “ # ” to confirm/save the code, the light will flash orange and 2 beeps will be heard, indicating the first code has been saved.
To set the second code:
- Press 0 two times, press the red code setting button, the light turns orange and 3 beeps are heard.
- Input a code of 1-8 digits using the 0-9 keys.
- Then press either “ * ” or “ # ” to confirm/save the code, the light will flash orange and 2 beeps will be heard, indicating the second code has been saved.
Opening your security safe using the codes
- Enter either user code, then press “ * ” or “ # ” to confirm. Indicating light flashes green.
- Turn the knob counter-clockwise to the unlock position.
- Lift up on the outer edge of the lid to open.
Note: After 5 seconds automatically resets to the readiness mode.
How to install tethering cable
- Open safe.
- Put the end of the cable (non-loop end) in the hole on the left side of the safe (back corner).
- Close the lid and lock the safe.
SentrySafe Customer Care
Thank you for purchasing a SentrySafe product. If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly without the product being returned. Call our Customer Care department for assistance.
Customer Care: 1-800-828-1438
Registration: To be eligible for warranty coverage, the original purchaser must register the product online at www.sentrysafe.com.
Delay mode:
- When an incorrect code is pressed, the light flashes red three times. If the wrong code is entered three consecutive times, the lock will be locked automatically for 20 seconds.
- If the wrong code is entered six consecutive times, it will be locked for 5 minutes.
- Low battery indicator, when a red light comes on – batteries should be replaced.
Preserving user code:
- When the lock power fails due to dead batteries, the codes will be preserved for approximately 3 hours, after that time the passcodes will be lost and will need to be reset.
Please note: A lock reference number is required to obtain replacement keys. The reference numbers and/or letters are engraved in the key lock cylinder as shown.
WARNING This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials, or medication should not be stored in this unit.
SentrySafe 900 Linden Avenue Rochester, New York 14625 USA
- Telephone: 585-381-4900
- Customer Care: 1-800-828-1438
- Fax: 585-381-2940
IMPORTANT
DO NOT RETURN SAFE TO THE STORE!
If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly without the product being returned.
B1-800-828-1438
FREQUENTLY ASKED QUESTIONS
What is the brand and model of this compact electronic safe?
The brand is SentrySafe, and the model is P008E.
What are the dimensions of the SentrySafe P008E?
The product dimensions are 7.1 inches deep and 1.9 inches high.
What is the lock type used in the SentrySafe P008E?
The SentrySafe P008E features a digital lock type for secure access.
What is the capacity of the SentrySafe P008E?
The SentrySafe P008E has a capacity of 0.08 cubic feet.
What material is the SentrySafe P008E made from?
The SentrySafe P008E is constructed from alloy steel for durability.
How can the SentrySafe P008E be mounted?
The SentrySafe P008E can be used as a freestanding or tabletop safe.
How much does the SentrySafe P008E weigh?
The item weight of the SentrySafe P008E is 3.2 pounds.
What are the dimensions of the chamber in the SentrySafe P008E?
The chamber dimensions are 7.1 inches deep and 10 inches wide.
Who is the manufacturer of the SentrySafe P008E?
The manufacturer of the SentrySafe P008E is SentrySafe.
What types of items can be stored in the SentrySafe P008E?
The SentrySafe P008E is suitable for storing documents, cash, jewelry, and other small valuables.
How does the digital lock work in the SentrySafe P008E?
The digital lock requires a numeric code to unlock, providing secure access to the contents.
How does the alloy steel construction benefit the SentrySafe P008E?
The alloy steel construction provides strength and resistance to tampering, ensuring better security for your valuables.
What is the price of the SentrySafe P008E?
The price of the SentrySafe P008E is $46.41.
Why isn’t the SentrySafe P008E Compact Electronic Safe turning on?
Ensure the batteries are properly installed and fully charged. Open the battery compartment to check for any loose connections or corrosion. If the safe still doesn’t turn on, replace the batteries with fresh ones and try again.
What should I do if the SentrySafe P008E Compact Electronic Safe isn’t accepting my code?
Double-check that you’re entering the correct code. Ensure that the buttons are pressed firmly and that the keypad is functioning properly. If the code is still not accepted, try resetting the code.
DOWNLOAD THE PDF LINK:SentrySafe P008E Compact Electronic Safe Owners Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>