MagBak MBQIML Wireless Charger User Manual
- June 5, 2024
- MagBak
Table of Contents
MagBak MBQIML Wireless Charger
MagBak Milti-charger
Read this manual carefully before using this product. Also, refer to the manual of the devices that will be used with this product to check for compatibility.
Product Specifications
| Name | MagBak Milti-Charger |
|---|---|
| Model | MBQIML |
| FCC ID | 2AT9G-MBQIML |
| Input | QC 10W Type-C |
| Size | 115.5 x 98.1 x 54.2 (mm) |
| Weight | 135 (g) |
| Cable Length | 1.5 (m) |
NOTE: The actual specifications may differ due to manufacturing variability and other factors.
Product Overview
Charging
- Watch: Attach Apple Watch to the MultiCharger by simply laying it down on the top charging pad.
- iPhone: Mount the iPhone on the MultiCharger on the front charging Pad with a MagBak case or directly by using MagSafe or compatible MagSafe accessory.
- AirPods: Simply lay down the AirPods on the back bottom charging pad.
IMPORTANT: For optimized charging speeds make sure to use a USB-C power adapter that supports PD 20W.
Care & Use
Avoid placing the MultiCharger in high humidity or high heat areas. Make sure
the surface where the MultiCharger is going to be placed is clean and free of
dust to ensure a strong bond. Clean the MultiCharger foot pad when moving it
from one place to another. Use a damp lint-free cloth to ensure a strong bond
with the new surface. Do not use any chemicals or abrasives.
Support
Scan the QR code with your camera to access additional support resources
online. For help with all MagBak products visit
support.magbak.com or email
info@1lss.com. Our support hours are Monday-Friday
9AM-5PM US Pacific Time.
FCC Statment
Notes: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by 1LSS INC. could void the user’s authority to operate the equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
1LSS INC. will not be liable for any loss or damages arising from this product, whether direct, indirect, special, incidental or consequential, regardless of the theory asserted, including warranty, contract, negligence or strict liability.California Prop. 65
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. FCC RF exposure statement:The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
www.magbak.com | support.magbak.com info@1lss.comMagBak is a registered trademark of 1LSS INC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>