naxa NTD-4050 Smart TV User Guide
- June 5, 2024
- NAXA
Table of Contents
TV QUICK SETUP GUIDE
- Connect an Antenna or Cable to your TV set.
- Connect the power plug to the wall outlet.
- Insert the 2 AAA batteries into the remote control and press STANDBY.
- To watch TV programs, press the SOURCE button on the remote control and scroll to TV mode, press ENTER to confirm.
If it is the first time you turn on your TV, the initial setup menu appears automatically.
- Press the UP/DOWN button to select a preferred item.
- Press the LEFT/RIGHT button to adjust the value.
Menu Language To choose your menu language.
Air / Cable To choose your Signal Type: Air. Cable.
Cable System To choose your Cable System: AUTO, STD, IRC, HRC.
NOTE: Cable System is adjustable only when your signal type is set to
Cable. Auto Scan Highlight Auto Scan, press ENTER to search and store all
available channels.
DVD OPERATION INSTRUCTIONS
INSERT THE DISC AS SHOWN IN THE FIGURE ON THE LEFT WITH THE READABLE (BOTTOM) SIDE OF THE DISC FACING TOWARDS YOU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>