Technics EAH-A800 Wireless Headphone Instruction Manual

Technics EAH-A800 Wireless Headphone

Accessories

Please check and identify the supplied accessories.

• 1 x Carrying case
• 1 x USB charging cord
• 1 x Detachable cord
• 1 x Airplane adaptor

Maintenance

Clean this unit with a dry and soft cloth.

• Do not use solvents including benzene, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off.

About Bluetooth®
Restrictions of use

• Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed.
• Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.

Safety precautions

Unit: WARNING:To reduce the risk of fire, electric shock or product damage

• Do not expose this unit to rain, moisture, dripping or splashing.
• Do not expose units containing batteries to excessive heat (e.g., from storage in direct sunlight, fire or the like).
• Use only the manufacturer’s recommended accessories.
• Do not disassemble the product.
• Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid the use in the following conditions
• High or low extreme temperatures during use, storage or transportation.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Extremely high temperature and/or extremely low air pressure can result in an explosion or the leakage of flammable liquid or gas.
• Do not place this unit near a heat source.
• Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites.
• Keep this unit away from something susceptible to magnetism. Such devices as a clock may not operate correctly.
• When using this unit in an airplane, heed the instructions given by the airline company. Some airlines may forbid your using the unit. For further details, contact the airline you will be flying with.
• Do not wear the headphones while charging.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3.
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• Keep the airplane adaptor out of reach of children to prevent swallowing.
• Proper charging is not possible if there is dust or droplets of water on the charging terminal of the headphones. Remove the dust or water droplets before charging.
• Be aware that this unit may get warm while charging or immediately after charging. Depending on your constitution and health status, putting the headphones on may trigger adverse reactions such as skin redness, itching, and rash if the headphones have just been disconnected from the power source and are still warm.
• Do not use any other USB charging cords except the supplied one.
• Do not use any other detachable cords except the supplied one.

Battery

• Do not heat or expose to flame.
• Do not leave the battery in a car exposed to direct sunlight for a long period of time with doors and windows closed.
• Battery mishandling can cause electrolyte leakage which can damage items the leaked fluid comes into contact with. If electrolyte leaks from the battery, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.
• When disposing of the battery, please contact your local authorities or dealer and ask for the correct method of disposal.

Allergies

• Discontinue use if you experience discomfort with the ear pads or any other parts that directly contact your skin.
• Continued use may cause rashes or other allergic reactions..

Precautions for listening with the Headphones

• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not use your headphones at a high volume. Hearing experts advise against continuous extended play.
• If you experience a ringing in your ears, reduce volume or discontinue use.
• Do not use while operating a motorised vehicle. It may create a traffic hazard and is illegal in many areas.
• You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
• Do not use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact customer service.
• Remove headphones immediately if you experience a warming sensation or loss of audio.
• The headphones do not play audio while charging.

This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase the separation between this unit and the mobile telephone.Use only the supplied USB charging cord when connecting to a computer.

1. Remove the left earpad to view certification information.
2. Certification information (a) is indicated on the speaker plate portion, which becomes visible when the left ear pad (L side) is removed.
3. To attach the ear pad, insert the clips b into the matching parts c on the ear pad. (There are 6 clips) If you pull the earpad too much, the earpad can tear.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.LDAC and LDAC logo are trademarks of Sony Corporation. QR Code is a registered trademark of DENSO WAVE INCORPORATED. Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the TM mark and ® mark do not appear in this document. This product incorporates the open-source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1. The software categorized as above are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown at the following web page.
https://panasonic.jp/support/global/cs/audio/download/index.html

This unit complies with the “High-Resolution Audio” standard of the Japan Audio Association.

• To enjoy wireless high-resolution quality (sound quality certified by the high-resolution wireless logo), use a playback device with the high-resolution wireless logo and set the Bluetooth® sound quality setting to sound quality priority mode / LDAC 990 kbps.
• In modes other than the above (connection priority mode, etc.), playback may not be possible with high-resolution quality.

Specifications

General

(Noise cancelling: ON, AAC)

Approx. 50 hours

(Noise cancelling: ON, SBC)

Approx. 40 hours (Noise cancelling: ON, LDAC)

Charging time *2 (25 o C)| Approx. 3.0 hours
Charging temperature range| 10 oC to 35 oC
Operating temperature range| 0 oC to 40 oC
Operating humidity range| 35 %RH to 80 %RH

(no condensation)

Mass| Approx. 298 g (without cord)

Bluetooth® section

Headphone section

To remove the battery when disposing of this unit

The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled.When disposing of this unit, take out the battery installed in this unit and recycle it.

1. Remove the left earpad.
2. Remove the sealing sponges and remove the 5 screws.
3. Remove part a in step 2.
4. Disconnect the connector (b), and peel off the tape fix the battery in place, remove the battery (c).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>