polysan KARIA Shower Trays Instruction Manual
- June 12, 2024
- Polysan
Table of Contents
polysan KARIA Shower Trays
Product Information
The product is called KARIA AURA SERA and it comes in different variants: A,
B, C, and D. The product is used for various applications such as floor tiles,
concrete, Ytong + tiles, and panels. It requires the use of Flexi glue and
silicone for installation. The product has specific requirements for minimum
thickness (2 mm) and voltage (V+15 V). The product is available in different
sizes, with variant A and B having a size of 150, variant C having a size of
96-125, and variant D having a size of 112.
Specific instructions and variations are provided for different types of
surfaces such as floor tiles (na dlazbu), concrete (na beton), Ytong + tiles,
and panels.
Product Usage Instructions
Installation on Floor Tiles (Variant A)
- Ensure the surface is clean and level.
- Apply Flexi glue on the bottom side of the KARIA AURA SERA tiles.
- Place the tiles on the floor tiles surface.
- Apply silicone on the joints between the tiles.
Installation on Concrete (Variant B)
- Ensure the concrete surface is clean and level.
- Apply Flexi glue on the bottom side of the KARIA AURA SERA tiles.
- Place the tiles on the concrete surface.
- Apply silicone on the joints between the tiles.
Installation on Ytong + Tiles (Variant C, A)
- Ensure the Ytong + tiles surface is clean and level.
- Apply Flexi glue on the bottom side of the KARIA AURA SERA tiles.
- Place the tiles on the Ytong + tiles surface.
- Apply silicone on the joints between the tiles.
Installation on Panels (Variant C, B)
- Ensure the panel surface is clean and level.
- Apply Flexi glue on the bottom side of the KARIA AURA SERA tiles.
- Place the tiles on the panel surface.
- Apply silicone on the joints between the tiles.
Note: The mentioned silicone types are 1205kkgg for variants A and B, and 2150kkgg for variant C and D. The specified minimum thickness for all installations is 2-3 mm.
Installation Instruction
