BGS technics 9992 Oil Filling Tool Instruction Manual
- June 5, 2024
- BGS technics
Table of Contents
BGS technics 9992 Oil Filling Tool Instruction Manual
SPECIFICATION
- Capacity: 7.5L
- Outlet: 80cc/ cycle
- Viscosity Range: up to SAE 14
GENERAL
This product is designed for filling transmissions, differentials and transfer
cases with oil.
ADAPTER
All adaptations are easy to install, simply plug into the hose fitting and
tighten the nut.
Short Adapter for VW / Audi Models
Long Adapter for VW / Audi, Porsche
Universal Adapter for BMW, Honda, Nissan, etc
Adapter M10 x 1.0 for VW
/ Audi, Mini
Adapter 1/8” NPT for Ford
Models
Threaded adapter M12 x
1.5 for Mercedes Benz 722 Automatic Transmission
Threaded adapter M22 x
1.5 for VW / Audi CVT Automatic Transmission
Threaded adapter M24 x
1.5 for VW / Audi DSG Automatic Transmission
INSTRUCTIONS
Step 1
Select the correct attachment.
Open the valve and push the oil way control bolt to right side, and then push the handle to transmit oil.
Step 2
When handle is hard to push and ATF of vehicle is almost full.
Push the oil way control bolt to left side and make smoothly transmission oil.
Step 3
When transmission oil almost finished. Close the valve.
Step 4
When finished transmission oil, stop to push the handle.
Take out the attachment from ATF and put the hose higher than tank, open the
valve, let residue oil in the house reflux into the tank.
Note:
- Do not used this item with e.g. petrol, diesel, etc.
- Keep away from fire.
- Please prevent polluting the ATF oil and keep work environment clean.
- For cleaning, use only a soft cloth and if necessary a soft cleaner. Strong cleaners may damage the plastic.
BGS technic KG Bandwirkerstr. 3 42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>